lkml.org 
[lkml]   [2002]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH] 2.5.7-dj1 add 5 help texts to arch/cris/Config.help
From
Date
This patch adds 5 help texts to arch/cris/Config.help.
The texts were obtained from ESR's v2.97 Configure.help.

Steven

--- linux-2.5.7-dj1/arch/cris/Config.help.orig Mon Mar 25 13:53:25 2002
+++ linux-2.5.7-dj1/arch/cris/Config.help Mon Mar 25 13:53:59 2002
@@ -392,3 +392,26 @@
CONFIG_ETRAX_RESCUE_SER3
Use serial port 3 as the rescue port.

+CONFIG_ETRAX_POWERBUTTON_BIT
+ Configure where power button is connected.
+
+CONFIG_ETRAX_ROOT_DEVICE
+ Specifies the device that should be mounted as root file system
+ when booting from flash. The axisflashmap driver adds an additional
+ mtd partition for the appended root file system image, so this option
+ should normally be the mtdblock device for the partition after the
+ last partition in the partition table.
+
+CONFIG_ETRAX_SHUTDOWN_BIT
+ Configure what pin on CSPO-port that is used for controlling power
+ supply.
+
+CONFIG_ETRAX_SOFT_SHUTDOWN
+ Enable this if Etrax is used with a power-supply that can be turned
+ off and on with PS_ON signal. Gives the possibility to detect
+ powerbutton and then do a power off after unmounting disks.
+
+CONFIG_ETRAX_WATCHDOG_NICE_DOGGY
+ By enabling this you make sure that the watchdog does not bite while
+ printing oopses. Recommended for development systems but not for
+ production releases.




-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:25    [W:0.040 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site