[lkml]   [2002]   [Mar]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: BUG: 2.4.18 & ALI15X3 DMA hang on boot
>> There seems to be some fundamental incompatibility between the kernel
>> and the IDE chipset. On several kernels in the 2.4 series including
>> 2.4.18, I observe a hang in the bootsequence at:
>> ALI15X3: IDE controller on PCI bus 00 dev 78
>> PCI: No IRQ known for interrupt pin A of device 00:0f.0. Please try using pc
>> ALI15X3: chipset revision 195
>> ALI15X3: not 100% native mode: will probe irqs later
>> <hang>
>And does pci=bios help ?

pci=biosirq doesn't help. Same failure mode.

>The kernel can't find out how the IDE IRQ routing is happening.

I haven't tried reserving IRQs in the bios (which is possible, but too
much like blind search unless I get some more advice).

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:22    [W:0.091 / U:17.312 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site