This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Thu Mar 28 15:01:36 2024 Received: from spaans.ds9a.nl (adsl-xs4all.ds9a.nl [213.84.159.51]) by kylie.puddingonline.com (8.11.6/8.11.6) with SMTP id g8IK44X20848 for ; Wed, 18 Sep 2002 22:04:05 +0200 Received: (qmail 21317 invoked from network); 18 Sep 2002 07:48:13 -0000 Received: from unknown (HELO spaans.ds9a.nl) (3ffe:8280:10:360:202:44ff:fe2a:a1dd) by mayo.ipv6.ds9a.nl with SMTP; 18 Sep 2002 07:48:13 -0000 Received: (qmail 4246 invoked by uid 1000); 17 Sep 2002 21:23:08 -0000 Received: (maildatabase); juh Received: (qmail 3042 invoked by alias); 14 Mar 2002 17:05:23 -0000 Received: (qmail 3039 invoked from network); 14 Mar 2002 17:05:23 -0000 Received: from unknown (HELO dipsaus.ds9a.tudelft.nl) (::ffff:10.0.0.202) by spaans.ds9a.nl with SMTP; 14 Mar 2002 17:05:23 -0000 Received: (qmail 26404 invoked from network); 14 Mar 2002 17:05:22 -0000 Received: from unknown (HELO vger.kernel.org) (::ffff:12.107.208.194) by adsl-xs4all.ds9a.nl with SMTP; 14 Mar 2002 17:05:22 -0000 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 14 Mar 2002 12:01:59 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 14 Mar 2002 12:01:48 -0500 Received: from smokey.blackcatnetworks.co.uk ([212.135.138.139]:13453 "EHLO smokey.blackcatnetworks.co.uk") by vger.kernel.org with ESMTP id convert rfc822-to-8bit; Thu, 14 Mar 2002 12:01:27 -0500 Received: from alex by smokey.blackcatnetworks.co.uk with local (Exim 3.12 #1 (Debian)) id 16lYbT-0005Ia-00; Thu, 14 Mar 2002 17:01:23 +0000 Date: Thu, 14 Mar 2002 17:01:23 +0000 From: Alex Walker To: Oleg Drokin Cc: linux-kernel@vger.kernel.org Subject: Re: Oops in 2.5.6 and 2.5.7-pre1 - reiserfs? Message-Id: <20020314170123.G9664@x3ja.co.uk> References: <20020314162009.F9664@x3ja.co.uk> <20020314192916.A1929@namesys.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: 8BIT User-Agent: Mutt/1.2.5i In-Reply-To: <20020314192916.A1929@namesys.com>; from green@namesys.com on Thu, Mar 14, 2002 at 07:29:16PM +0300 Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org X-Spam-Status: No, hits=-5.0 required=5.0 tests=SUBJ_ENDS_IN_Q_MARK,IN_REP_TO version=2.11 Lines: 512 Appears to work fine - thanks for the quick response! (Although I did think it had killed my net card, but they just shuffled tulip stuff around) Whilst I'm here... Is there a neat way to convert your root system from 3.5 to 3.6? I tried "mount -o remount,conv /" which gave no errors, but didn't actually convert it. I also tried adding conv to the options in /etc/fstab, but to similar effect... Do I have to copy to a different partition with a 3.6 format and use that as my root to do it? Cheers. Alex On Thu, Mar 14, 2002 at 07:29:16PM +0300, Oleg Drokin wrote: > Hello! > Try the patch attached. > Bye, > Oleg > On Thu, Mar 14, 2002 at 04:20:09PM +0000, Alex Walker wrote: > > Please CC me in replies to this - I'm not on the list. > > I am using the 2.5 series on a couple of machine (mainly because they > > now have ALSA and preempt in) and one is running fine, the other oopses > > on boot to 2.5.6 or 2.5.7-pre1. > > I think the problem is from reiserfs somewhere. Attached are the > > ksymoops interpretations of the two Oops (which seem virtually > > identical), and also the kernel logs of boot to both kernels. > > I have reiserfs on my root partition, and it is in the 3.5 format > > (haven't got found out how to convert to 3.6) which may be significant. > > All other partitions are in the 3.6 format. > > The last known working 2.5 kernel for me is 2.5.6-pre1. > > If you want any more information, please let me know. > > Cheers, > > Alex > > -- > > ALEX|X3JA > > alex@x3ja.co.uk > > ICQ: 1523424 > > ksymoops 2.4.3 on i686 2.5.6-pre1. Options used > > -V (default) > > -K (specified) > > -L (specified) > > -o /lib/modules/2.5.6 (specified) > > -m /boot/System.map-2.5.6 (specified) > > No modules in ksyms, skipping objects > > cpu: 0, clocks: 1328955, slice: 664477 > > Unable to handle kernel NULL pointer dereference at virtual address 00000010 > > c0135f3e > > *pde = 00000000 > > Oops: 0000 > > CPU: 0 > > EIP: 0010:[] Not tainted > > Using defaults from ksymoops -t elf32-i386 -a i386 > > EFLAGS: 00010286 > > eax: 00001000 ebx: 0000000e ecx: 00000008 edx: 00002012 > > esi: 00000008 edi: 00002012 ebp: 00000000 esp: c13edd64 > > ds: 0018 es: 0018 ss: 0018 > > Stack: 00001000 00002012 00000000 d3d09c00 d3d09c00 c01365e8 00000000 00002012 > > 00001000 d3d09c00 d4834000 d48453ec c01367ef 00000000 00002012 00001000 > > d3d09c00 c01b2196 00000000 00002012 00001000 00000306 00000000 d3d09d54 > > Call Trace: [] [] [] [] [] > > [] [] [] [] [] [] > > [] [] [] [] [] [] > > [] > > Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 0f b7 c0 89 44 24 10 > > >>EIP; c0135f3e <__get_hash_table+1a/bc> <===== > > Trace; c01365e8 <__getblk+1c/40> > > Trace; c01367ee <__bread+16/70> > > Trace; c01b2196 > > Trace; c0135710 <__wait_on_buffer+84/90> > > Trace; c01a4808 > > Trace; c01a50cc > > Trace; c01bbe0c > > Trace; c0139f7e > > Trace; c01a54ae > > Trace; c01a4fa8 > > Trace; c013a136 > > Trace; c014aa98 > > Trace; c014ad70 > > Trace; c014abb4 > > Trace; c014b190 > > Trace; c0105258 > > Trace; c0105072 > > Trace; c01055fc > > Code; c0135f3e <__get_hash_table+1a/bc> > > 00000000 <_EIP>: > > Code; c0135f3e <__get_hash_table+1a/bc> <===== > > 0: 0f b7 45 10 movzwl 0x10(%ebp),%eax <===== > > Code; c0135f42 <__get_hash_table+1e/bc> > > 4: b0 00 mov $0x0,%al > > Code; c0135f44 <__get_hash_table+20/bc> > > 6: 66 0f b6 55 10 movzbw 0x10(%ebp),%dx > > Code; c0135f48 <__get_hash_table+24/bc> > > b: 01 d0 add %edx,%eax > > Code; c0135f4a <__get_hash_table+26/bc> > > d: 0f b7 c0 movzwl %ax,%eax > > Code; c0135f4e <__get_hash_table+2a/bc> > > 10: 89 44 24 10 mov %eax,0x10(%esp,1) > > <0>Kernel panic: Attempted to kill init! > > ksymoops 2.4.3 on i686 2.5.6-pre1. Options used > > -V (default) > > -K (specified) > > -L (specified) > > -o /lib/modules/2.5.7-pre1/ (specified) > > -m /boot/System.map-2.5.7-pre1 (specified) > > No modules in ksyms, skipping objects > > cpu: 0, clocks: 1328955, slice: 664477 > > Unable to handle kernel NULL pointer dereference at virtual address 00000010 > > c01362de > > *pde = 00000000 > > Oops: 0000 > > CPU: 0 > > EIP: 0010:[] Not tainted > > Using defaults from ksymoops -t elf32-i386 -a i386 > > EFLAGS: 00010292 > > eax: 00001000 ebx: 0000000e ecx: 00000008 edx: 00002012 > > esi: 00000008 edi: 00002012 ebp: 00000000 esp: c13edd6c > > ds: 0018 es: 0018 ss: 0018 > > Stack: 00001000 00002012 00000000 d3d09c00 d3d09c00 c0136988 00000000 00002012 > > 00001000 d3d09c00 d4834000 d48453ec c0136b8f 00000000 00002012 00001000 > > d3d09c00 c01b26f6 00000000 00002012 00001000 00000306 00000000 d3d09d54 > > Call Trace: [] [] [] [] [] > > [] [] [] [] [] [] > > [] [] [] [] [] [] > > [] [] > > Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 0f b7 c0 89 44 24 10 > > >>EIP; c01362de <__get_hash_table+1a/bc> <===== > > Trace; c0136988 <__getblk+1c/40> > > Trace; c0136b8e <__bread+16/70> > > Trace; c01b26f6 > > Trace; c0135ab0 <__wait_on_buffer+84/90> > > Trace; c01a4d68 > > Trace; c01a562c > > Trace; c01bc36c > > Trace; c013b638 > > Trace; c013a310 > > Trace; c01a5a0e > > Trace; c01a5508 > > Trace; c013a4e0 > > Trace; c014ae58 > > Trace; c014b130 > > Trace; c014af74 > > Trace; c014b550 > > Trace; c0105258 > > Trace; c0105072 > > Trace; c01055fc > > Code; c01362de <__get_hash_table+1a/bc> > > 00000000 <_EIP>: > > Code; c01362de <__get_hash_table+1a/bc> <===== > > 0: 0f b7 45 10 movzwl 0x10(%ebp),%eax <===== > > Code; c01362e2 <__get_hash_table+1e/bc> > > 4: b0 00 mov $0x0,%al > > Code; c01362e4 <__get_hash_table+20/bc> > > 6: 66 0f b6 55 10 movzbw 0x10(%ebp),%dx > > Code; c01362e8 <__get_hash_table+24/bc> > > b: 01 d0 add %edx,%eax > > Code; c01362ea <__get_hash_table+26/bc> > > d: 0f b7 c0 movzwl %ax,%eax > > Code; c01362ee <__get_hash_table+2a/bc> > > 10: 89 44 24 10 mov %eax,0x10(%esp,1) > > <0>Kernel panic: Attempted to kill init! > > Loading 2.5.6................... > > s Linux version 2.5.6 (alex@numbers) (gcc version 2.95.4 20011002 (Debian prerelease)) #3 Thu Mar 14 14:48:28 GMT 2002 > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > > BIOS-e820: 0000000000100000 - 0000000013fc0000 (usable) > > BIOS-e820: 0000000013fc0000 - 0000000013ff8000 (ACPI data) > > BIOS-e820: 0000000013ff8000 - 0000000014000000 (ACPI NVS) > > BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) > > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > > 319MB LOWMEM available. > > On node 0 totalpages: 81856 > > zone(0): 4096 pages. > > zone(1): 77760 pages. > > zone(2): 0 pages. > > Kernel command line: BOOT_IMAGE=2.5.6 ro root=306 console=ttyS0,9600n8 console=tty0 > > Local APIC disabled by BIOS -- reenabling. > > Found and enabled local APIC! > > Initializing CPU#0 > > Detected 930.255 MHz processor. > > Console: colour VGA+ 80x25 > > Calibrating delay loop... 1854.66 BogoMIPS > > Memory: 321084k/327424k available (1470k kernel code, 5952k reserved, 474k data, 208k init, 0k highmem) > > Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) > > Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) > > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > > Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) > > Page-cache hash table entries: 131072 (order: 7, 524288 bytes) > > CPU: L1 I cache: 16K, L1 D cache: 16K > > CPU: L2 cache: 256K > > Intel machine check architecture supported. > > Intel machine check reporting enabled on CPU#0. > > CPU: Intel Pentium III (Coppermine) stepping 06 > > Enabling fast FPU save and restore... done. > > Enabling unmasked SIMD FPU exception support... done. > > Checking 'hlt' instruction... OK. > > POSIX conformance testing by UNIFIX > > enabled ExtINT on CPU#0 > > ESR value before enabling vector: 00000000 > > ESR value after enabling vector: 00000000 > > Using local APIC timer interrupts. > > calibrating APIC timer ... > > ..... CPU clock speed is 930.2691 MHz. > > ..... host bus clock speed is 132.8955 MHz. > > cpu: 0, clocks: 1328955, slice: 664477 > > CPU0 > > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > > mtrr: detected mtrr type: Intel > > Linux NET4.0 for Linux 2.4 > > Based upon Swansea University Computer Society NET3.039 > > Initializing RT netlink socket > > PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 > > PCI: Using configuration type 1 > > PCI: Probing PCI hardware > > Unknown bridge resource 0: assuming transparent > > PCI: Discovered primary peer bus 08 [IRQ] > > PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 > > Starting kswapd > > BIO: pool of 256 setup, 14Kb (56 bytes/bio) > > biovec: init pool 0, 1 entries, 12 bytes > > biovec: init pool 1, 4 entries, 48 bytes > > biovec: init pool 2, 16 entries, 192 bytes > > biovec: init pool 3, 64 entries, 768 bytes > > biovec: init pool 4, 128 entries, 1536 bytes > > biovec: init pool 5, 256 entries, 3072 bytes > > Journalled Block Device driver loaded > > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > > ACPI: Core Subsystem version [20011018] > > ACPI: Subsystem enabled > > Power Resource: found > > Power Resource: found > > Power Resource: found > > Power Resource: found > > ACPI: System firmware supports S0 S1 S4 S5 > > Processor[0]: C0 C1 > > ACPI: Power Button (FF) found > > ACPI: Sleep Button (CM) found > > pty: 256 Unix98 ptys configured > > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled > > ttyS00 at 0x03f8 (irq = 4) is a 16550A > > Real Time Clock Driver v1.11 > > block: 256 slots per queue, batch=32 > > Linux video capture interface: v1.00 > > Linux agpgart interface v0.99 (c) Jeff Hartmann > > agpgart: Maximum main memory to use for agp memory: 262M > > agpgart: Detected Intel i815 chipset > > agpgart: AGP aperture is 64M @ 0xf8000000 > > Uniform Multi-Platform E-IDE driver ver.:7.0.0 > > ide: system bus speed 33MHz > > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: IDE controller on PCI slot 00:1f.1 > > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: chipset revision 2 > > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: not 100% native mode: will probe irqs later > > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA > > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > > hda: QUANTUM FIREBALLlct20 20, ATA DISK drive > > hdb: SAMSUNG SV2044D, ATA DISK drive > > hdc: MATSHITADVD-ROM SR-8586, ATAPI CD/DVD-ROM drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > blk: queue c034dbac, I/O limit 4095Mb (mask 0xffffffff) > > hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33) > > blk: queue c034ddcc, I/O limit 4095Mb (mask 0xffffffff) > > hdb: 39862368 sectors (20410 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(66) > > Partition check: > > hda: [PTBL] [2482/255/63] hda1 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > > > hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 > > > usb.c: registered new driver usbfs > > usb.c: registered new driver hub > > uhci.c: USB Universal Host Controller Interface driver v1.1 > > PCI: Found IRQ 3 for device 00:1f.2 > > PCI: Setting latency timer of device 00:1f.2 to 64 > > uhci.c: USB UHCI at I/O 0xef40, IRQ 3 > > hcd.c: new USB bus registered, assigned bus number 1 > > hub.c: USB hub found at / > > hub.c: 2 ports detected > > PCI: Found IRQ 9 for device 00:1f.4 > > PCI: Setting latency timer of device 00:1f.4 to 64 > > uhci.c: USB UHCI at I/O 0xef80, IRQ 9 > > hcd.c: new USB bus registered, assigned bus number 2 > > hub.c: USB hub found at / > > hub.c: 2 ports detected > > usb.c: registered new driver hid > > hid-core.c: v1.31:USB HID core driver > > mice: PS/2 mouse device common for all mice > > NET4: Linux TCP/IP 1.0 for NET4.0 > > IP Protocols: ICMP, UDP, TCP, IGMP > > IP: routing cache hash table of 2048 buckets, 16Kbytes > > TCP: Hash tables configured (established 32768 bind 32768) > > ip_conntrack (2558 buckets, 20464 max) > > ip_tables: (C) 2000-2002 Netfilter core team > > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > > found reiserfs format "3.5" with standard journal > > Unable to handle kernel NULL pointer dereference at virtual address 00000010 > > printing eip: > > c0135f3e > > *pde = 00000000 > > Oops: 0000 > > CPU: 0 > > EIP: 0010:[] Not tainted > > EFLAGS: 00010286 > > eax: 00001000 ebx: 0000000e ecx: 00000008 edx: 00002012 > > esi: 00000008 edi: 00002012 ebp: 00000000 esp: c13edd64 > > ds: 0018 es: 0018 ss: 0018 > > Process swapper (pid: 1, threadinfo=c13ec000 task=c13ea040) > > Stack: 00001000 00002012 00000000 d3d09c00 d3d09c00 c01365e8 00000000 00002012 > > 00001000 d3d09c00 d4834000 d48453ec c01367ef 00000000 00002012 00001000 > > d3d09c00 c01b2196 00000000 00002012 00001000 00000306 00000000 d3d09d54 > > Call Trace: [] [] [] [] [] > > [] [] [] [] [] [] > > [] [] [] [] [] [] > > [] > > Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 0f b7 c0 89 44 24 10 > > <0>Kernel panic: Attempted to kill init! > > Loading 2.5.7-p1................... > > s Linux version 2.5.7-pre1 (alex@numbers) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Thu Mar 14 15:50:33 GMT 2002 > > BIOS-provided physical RAM map: > > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > > BIOS-e820: 0000000000100000 - 0000000013fc0000 (usable) > > BIOS-e820: 0000000013fc0000 - 0000000013ff8000 (ACPI data) > > BIOS-e820: 0000000013ff8000 - 0000000014000000 (ACPI NVS) > > BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) > > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > > 319MB LOWMEM available. > > On node 0 totalpages: 81856 > > zone(0): 4096 pages. > > zone(1): 77760 pages. > > zone(2): 0 pages. > > Kernel command line: BOOT_IMAGE=2.5.7-p1 ro root=306 console=ttyS0,9600n8 console=tty0 > > Local APIC disabled by BIOS -- reenabling. > > Found and enabled local APIC! > > Initializing CPU#0 > > Detected 930.254 MHz processor. > > Console: colour VGA+ 80x25 > > Calibrating delay loop... 1854.66 BogoMIPS > > Memory: 321084k/327424k available (1471k kernel code, 5952k reserved, 476k data, 208k init, 0k highmem) > > Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) > > Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) > > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > > Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) > > Page-cache hash table entries: 131072 (order: 7, 524288 bytes) > > CPU: L1 I cache: 16K, L1 D cache: 16K > > CPU: L2 cache: 256K > > Intel machine check architecture supported. > > Intel machine check reporting enabled on CPU#0. > > CPU: Intel Pentium III (Coppermine) stepping 06 > > Enabling fast FPU save and restore... done. > > Enabling unmasked SIMD FPU exception support... done. > > Checking 'hlt' instruction... OK. > > POSIX conformance testing by UNIFIX > > enabled ExtINT on CPU#0 > > ESR value before enabling vector: 00000000 > > ESR value after enabling vector: 00000000 > > Using local APIC timer interrupts. > > calibrating APIC timer ... > > ..... CPU clock speed is 930.2702 MHz. > > ..... host bus clock speed is 132.8955 MHz. > > cpu: 0, clocks: 1328955, slice: 664477 > > CPU0 > > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > > mtrr: detected mtrr type: Intel > > Linux NET4.0 for Linux 2.4 > > Based upon Swansea University Computer Society NET3.039 > > Initializing RT netlink socket > > PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 > > PCI: Using configuration type 1 > > PCI: Probing PCI hardware > > Unknown bridge resource 0: assuming transparent > > PCI: Discovered primary peer bus 08 [IRQ] > > PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 > > Starting kswapd > > BIO: pool of 256 setup, 14Kb (56 bytes/bio) > > biovec: init pool 0, 1 entries, 12 bytes > > biovec: init pool 1, 4 entries, 48 bytes > > biovec: init pool 2, 16 entries, 192 bytes > > biovec: init pool 3, 64 entries, 768 bytes > > biovec: init pool 4, 128 entries, 1536 bytes > > biovec: init pool 5, 256 entries, 3072 bytes > > Journalled Block Device driver loaded > > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > > ACPI: Core Subsystem version [20011018] > > ACPI: Subsystem enabled > > Power Resource: found > > Power Resource: found > > Power Resource: found > > Power Resource: found > > ACPI: System firmware supports S0 S1 S4 S5 > > Processor[0]: C0 C1 > > ACPI: Power Button (FF) found > > ACPI: Sleep Button (CM) found > > pty: 256 Unix98 ptys configured > > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled > > ttyS00 at 0x03f8 (irq = 4) is a 16550A > > Real Time Clock Driver v1.11 > > block: 256 slots per queue, batch=32 > > Linux video capture interface: v1.00 > > Linux agpgart interface v0.99 (c) Jeff Hartmann > > agpgart: Maximum main memory to use for agp memory: 262M > > agpgart: Detected Intel i815 chipset > > agpgart: AGP aperture is 64M @ 0xf8000000 > > Uniform Multi-Platform E-IDE driver ver.:7.0.0 > > ide: system bus speed 33MHz > > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: IDE controller on PCI slot 00:1f.1 > > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: chipset revision 2 > > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: not 100% native mode: will probe irqs later > > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA > > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > > hda: QUANTUM FIREBALLlct20 20, ATA DISK drive > > hdb: SAMSUNG SV2044D, ATA DISK drive > > hdc: MATSHITADVD-ROM SR-8586, ATAPI CD/DVD-ROM drive > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide1 at 0x170-0x177,0x376 on irq 15 > > blk: queue c034de0c, I/O limit 4095Mb (mask 0xffffffff) > > hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=39560/16/63, UDMA(33) > > blk: queue c034e02c, I/O limit 4095Mb (mask 0xffffffff) > > hdb: 39862368 sectors (20410 MB) w/472KiB Cache, CHS=39546/16/63, UDMA(66) > > Partition check: > > hda: [PTBL] [2482/255/63] hda1 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 hda12 hda13 > > > hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 > > > usb.c: registered new driver usbfs > > usb.c: registered new driver hub > > uhci.c: USB Universal Host Controller Interface driver v1.1 > > PCI: Found IRQ 3 for device 00:1f.2 > > PCI: Setting latency timer of device 00:1f.2 to 64 > > uhci.c: USB UHCI at I/O 0xef40, IRQ 3 > > hcd.c: new USB bus registered, assigned bus number 1 > > hub.c: USB hub found at / > > hub.c: 2 ports detected > > PCI: Found IRQ 9 for device 00:1f.4 > > PCI: Setting latency timer of device 00:1f.4 to 64 > > uhci.c: USB UHCI at I/O 0xef80, IRQ 9 > > hcd.c: new USB bus registered, assigned bus number 2 > > hub.c: USB hub found at / > > hub.c: 2 ports detected > > usb.c: registered new driver hid > > hid-core.c: v1.31:USB HID core driver > > mice: PS/2 mouse device common for all mice > > NET4: Linux TCP/IP 1.0 for NET4.0 > > IP Protocols: ICMP, UDP, TCP, IGMP > > IP: routing cache hash table of 2048 buckets, 16Kbytes > > TCP: Hash tables configured (established 32768 bind 32768) > > ip_conntrack (2558 buckets, 20464 max) > > ip_tables: (C) 2000-2002 Netfilter core team > > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > > found reiserfs format "3.5" with standard journal > > Unable to handle kernel NULL pointer dereference at virtual address 00000010 > > printing eip: > > c01362de > > *pde = 00000000 > > Oops: 0000 > > CPU: 0 > > EIP: 0010:[] Not tainted > > EFLAGS: 00010292 > > eax: 00001000 ebx: 0000000e ecx: 00000008 edx: 00002012 > > esi: 00000008 edi: 00002012 ebp: 00000000 esp: c13edd6c > > ds: 0018 es: 0018 ss: 0018 > > Process swapper (pid: 1, threadinfo=c13ec000 task=c13ea040) > > Stack: 00001000 00002012 00000000 d3d09c00 d3d09c00 c0136988 00000000 00002012 > > 00001000 d3d09c00 d4834000 d48453ec c0136b8f 00000000 00002012 00001000 > > d3d09c00 c01b26f6 00000000 00002012 00001000 00000306 00000000 d3d09d54 > > Call Trace: [] [] [] [] [] > > [] [] [] [] [] [] > > [] [] [] [] [] [] > > [] [] > > Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 0f b7 c0 89 44 24 10 > > <0>Kernel panic: Attempted to kill init! > --- linux-2.5.6/fs/reiserfs/journal.c.orig Tue Mar 12 15:25:27 2002 > +++ linux-2.5.6/fs/reiserfs/journal.c Tue Mar 12 15:26:47 2002 > @@ -1958,8 +1958,7 @@ > SB_ONDISK_JOURNAL_DEVICE( super ) ? > to_kdev_t(SB_ONDISK_JOURNAL_DEVICE( super )) : super -> s_dev; > /* there is no "jdev" option and journal is on separate device */ > - if( ( !jdev_name || !jdev_name[ 0 ] ) && > - SB_ONDISK_JOURNAL_DEVICE( super ) ) { > + if( ( !jdev_name || !jdev_name[ 0 ] ) ) { > journal -> j_dev_bd = bdget( kdev_t_to_nr( jdev ) ); > if( journal -> j_dev_bd ) > result = blkdev_get( journal -> j_dev_bd, > @@ -1974,9 +1973,6 @@ > return result; > } > - /* no "jdev" option and journal is on the host device */ > - if( !jdev_name || !jdev_name[ 0 ] ) > - return 0; > journal -> j_dev_file = filp_open( jdev_name, 0, 0 ); > if( !IS_ERR( journal -> j_dev_file ) ) { > struct inode *jdev_inode; Alex -- ALEX|X3JA alex@x3ja.co.uk ICQ: 1523424 MSN: x3ja@hotmail.com - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/