lkml.org 
[lkml]   [2002]   [Feb]   [5]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
FromDenis Vlasenko <>
SubjectRe: Athlon Optimization Problem
DateTue, 5 Feb 2002 10:56:20 -0200
On 5 February 2002 01:22, Serguei Miridonov wrote:
> Just as followup... I was trying to find a minimum deviation
> from BIOS settigns to make Soyo Dragon Plus stable:
>
> In KT266A northbridge 1106:3099:
>
> Reg[0x75] = 0x07; // this was set to 0x01 by BIOS
> Reg[0x76] = 0x00; // this was 0x10
> Without this change I had filesystem corruptions during
> kernel compilation...

[MODEL]=VT8366 (KT266) Athlon NB
[VID]=1106:VIA
[DID]=3099:Host to PCI Bridge

[75:7]=Arbitration Mode         0=REQ-based 1=Frame-based
(75:6)=CPU Latency Timer                read only
(75:5)=(same as above)
(75:4)=(same as above)
[75:3]=(Reserved)
[75:2]=PCI Master Bus Time-Out  000=Disable
[75:1]=001=1x32 PCICLKs         010=2x32 PCICLKs
[75:0]=011=3x32 PCICLKs ...     111=7x32 PCICLKs

Note: other doc I have (for KT266A) says 75.3 is used for PCI Master Bus 
Time-Out too (thus max timeout is 1111 = 15x32 PCICLKs)
[76:7]=I/O Port 22 Enable
[76:6]=(Reserved)
[76:5]=Master Priority Rotation 0x=every PCI master grant
[76:4]=10=after every 2 PCI     11=after every 3 PCI
[76:3]=REQn# to REQ4# Mapping   00=REQ4#    01=REQ0#
[76:2]=10=REQ1#    11=REQ2#
[76:1]=(Reserved)
[76:0]=REQ4# Is High Priority   0=disable   1=enable

KT266A doc says:
76.5-4: Master Priority Rotation: 00 disable
        01 every PCI master grant
        10 every 2 PCI master grant
        11 every 3 PCI master grant
--
vda
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:23    [from the cache]
©2003-2008