lkml.org 
[lkml]   [2002]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
I'm setting up a new machine with a pair of IDE drives connected to
HPT 370 controller. I defined a RAID-1 array using the HPT370 bios
setting utility.
Description - hard:
motherboard Abit ST6-RAID, HPT370, 2 identical hard disks as
primary/secondary master on ide3/ide4
- bios:
Primary Master: Mirror (Raid 1) for Array #0 UDMA 5 78150 BOOT
Primary Slave: No drive
Secondary Master: Mirror (Raid 1) for Array #0 UDMA 5 78150 HIDDEEN
Secondary Slave: No drive
- os:
Linux RedHat 7.1 & kernel 2.4.17
with compilation option
CONFIG_BLK_DEV_ATARAID_HPT=y
Lilo:
...
root=/dev/hde10
...

During system booting i see following
...
ataraid/d0: ataraid/d0p1 ataraid/d0p2 ataraid/d0p3 ataraid/d0p4 <>
Highpoint HPT370 Softwareraid driver for linux version 0.01
Drive 0 is 76319 Mb
Drive 6 is 76319 Mb
Raid array consists of 2 drivers
...
Kernel panic: VFS: Unable to mount root fs on 21:0a
...

And system stop

Booting with option root=/dev/atarad/d0p1 ro
(or root=/dev/ataraid/d0p10 ro)
and etc - no effect

Any hints?

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:24    [W:0.037 / U:1.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site