lkml.org 
[lkml]   [2002]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.4.18-rcx: Dual P3 + VIA + APIC
On Fri, 22 Feb 2002 14:02:46 +0100
Adam Lackorzynski <adam@os.inf.tu-dresden.de> wrote:

> On Thu Feb 21, 2002 at 21:11:42 +0100, Stephan von Krawczynski wrote:
> > Hm, interestingly there seem to be more people with via+SMP+somewhat
> > problems. Interestingly, because I cannot confirm these troubles,
> > using such a setup myself. Just have a look:
>
> > (This is Asus CUV4X-D, dual PIII, and a damn lot of stuff inside :-)
>
> Same MB here, the lspci output is also the same (for the onboard stuff ;).

Ok, this is fine and makes the comparison at least possible to some extent.

> > I compile my kernel (2.4.18-rc2) with the attached config. Please try
> > it and tell your results. I can assure you that this machine runs rock
> > solid over here for months.
>
> No luck here. Hangs during boot (tried with 2.4.18-rc2-ac2).

Please start from a setup as close to mine as possible. That is 2.4.18-rc2.
In setup switch MPS 1.4 support to disable and Power Management to disable.

> I even updated the BIOS from 1010 to 1014 as well (just in case). What
> BIOS version are you running? And at how many MHz are the CPUs?

I use BIOS 1010, 2 x P3 1 GHz and tried RAM from 512MB to 2GB. Currently installed are 2GB being 2 x 1GB registered DIMM.

Regards,
Stephan


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:24    [W:0.126 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site