[lkml]   [2002]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    Subjecteepro100 driver can't read serial eeprom that is beyond a bridge

    We have a system running 2.4.17 with the following configuration.

    ------North Bridge---------PCI-PCI-BRIDGE----82559ER
    # lspci
    00:12.0 Ethernet controller: Intel Corp. 82559ER (rev 09)
    00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)

    02:01.0 Ethernet controller: Intel Corp. 82559ER (rev 09)

    #insmod eepro100

    eth0: Intel Corp. 82559ER, l00:eC0:s85:/30:292:.9F, 4IRQ 12.

    eth1: OEM i82557/i82558 10/100 Ethernet, FF:FF:FF:FF:FF:FF, IRQ 10.

    It seems eepro100 driver can't read the eeprom from the 2nd card. I
    printed the data bits in the
    do_eeprom_cmd routine, all were 1. Adjusting the delay did not help.

    The eepro100 driver on 2.2 kernel works fine and even intel's e100
    driver on
    2.4.17 also works fine.

    I guess there may be some timing issues involved.

    Are the devices beyond a bridge imapped to I/O space properly in 2.4
    kernel? Intel's driver reads the EEPROM
    control register using memory cycles.


    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:24    [W:0.021 / U:20.980 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site