lkml.org 
[lkml]   [2002]   [Dec]   [8]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
FromShawn Starr <>
SubjectRe: [PATCH][2.5][RFT] ide-pnp.c conversion to new PnP layer
DateSun, 8 Dec 2002 00:14:38 -0500
Found the jumper for the PS/2 connector. Enabled this. PNP still wants
IRQ12 though. So if I had a PS/2 mouse, it would conflict with the old ISA
Sound blaster IDE Controller.

Shawn.

>
> On December 7, 2002 10:48 pm, Shawn Starr wrote:
> > Things have been going on the background (this issue that is). The drive
> > is detected with TCQ disabled (kernel panics when enabled).
> >
> > pnp: the driver 'ide-pnp' has been registered
> > pnp: pnp: match found with the PnP device 'er' and the driver 'ide-pnp'
> > pnp: the device 'er' has been activated
> > ide6: ISA Plug and Play IDE interface
> > hdm: probing with STATUS(0x50) instead of ALTSTATUS(0xff)
> > hdm: WDC AC32500H, ATA DISK drive
> > hdn: probing with STATUS(0x00) instead of ALTSTATUS(0xff)
> > hdn: probing with STATUS(0x01) instead of ALTSTATUS(0xff)
> > isa bounce pool size: 16 pages
> > ide6 at 0x100-0x107,0x300 on irq 12
> > hda: host protected area => 1
> > hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=4866/255/63, (U)DMA
> >  hda: hda1 hda2
> > hdm: irq timeout: status=0x50 { DriveReady SeekComplete }
> >
> > hdm: setmax LBA 252928064, native  4999680
> > hdm: 4999680 sectors (2560 MB) w/128KiB Cache, CHS=4960/16/63
> >  hdm:hdm: irq timeout: status=0x50 { DriveReady SeekComplete }
> > ide6: unexpected interrupt, status=0x58, count=1
> > ide6: reset: master: error (0x00?)
> > ide6: reset: master: error (0x00?)
> > end_request: I/O error, dev hdm, sector 0
> >  unknown partition table
> >
> > The odd thing is its reporting ide6 when I only have ide0, ide1 :-)
> > (onboard PIIX3 IDE controller).
> >
> > We can't use IRQ 12 because this board has a PS/2 port (but I don't think
> > the jumper [if there is one] is enabled).
> >
> > Just thought i'd keep LKML in the loop with the progress.
> >
> > On December 7, 2002 07:37 pm, Zwane Mwaikambo wrote:
> > > Here is a traditional diff in contrast to the CVS thing which doesn't
> > > seem to apply to anyone else's tree.
> > >
> > > --- linux-2.5.50-bochs/drivers/ide/ide-pnp.c.orig	2002-12-07
> > > 19:35:04.000000000 -0500 +++
> > > linux-2.5.50-bochs/drivers/ide/ide-pnp.c	2002-12-07 19:35:13.000000000
> > > -0500 @@ -18,13 +18,11 @@
> > >
> > >  #include <linux/ide.h>
> > >  #include <linux/init.h>
> > > -
> > > -#include <linux/isapnp.h>
> > > +#include <linux/pnp.h>
> > >
> > >  #define DEV_IO(dev, index) (dev->resource[index].start)
> > >  #define DEV_IRQ(dev, index) (dev->irq_resource[index].start)
> > > -
> > > -#define DEV_NAME(dev) (dev->bus->name ? dev->bus->name : "ISA PnP")
> > > +#define DEV_NAME(dev) (dev->protocol->name ? dev->protocol->name :
> > > "ISA PnP")
> > >
> > >  #define GENERIC_HD_DATA		0
> > >  #define GENERIC_HD_ERROR	1
> > > @@ -35,125 +33,125 @@
> > >  #define GENERIC_HD_SELECT	6
> > >  #define GENERIC_HD_STATUS	7
> > >
> > > -static int generic_ide_offsets[IDE_NR_PORTS] __initdata = {
> > > +static int generic_ide_offsets[IDE_NR_PORTS] = {
> > >  	GENERIC_HD_DATA, GENERIC_HD_ERROR, GENERIC_HD_NSECTOR,
> > >  	GENERIC_HD_SECTOR, GENERIC_HD_LCYL, GENERIC_HD_HCYL,
> > >  	GENERIC_HD_SELECT, GENERIC_HD_STATUS, -1, -1
> > >  };
> > >
> > >  /* ISA PnP device table entry */
> > > -struct pnp_dev_t {
> > > -	unsigned short card_vendor, card_device, vendor, device;
> > > -	int (*init_fn)(struct pci_dev *dev, int enable);
> > > +struct idepnp_private {
> > > +	struct pnp_dev *dev;
> > > +	struct pci_dev pci_dev; /* we need this for the upper layers */
> > > +	int (*init_fn)(struct idepnp_private *device, int enable);
> > >  };
> > >
> > > -/* Generic initialisation function for ISA PnP IDE interface */
> > > +/* Barf bags at the ready! Enough to satisfy IDE core */
> > > +static void pnp_to_pci(struct pnp_dev *pnp_dev, struct pci_dev
> > > *pci_dev) +{
> > > +	pci_dev->dev = pnp_dev->dev;
> > > +	pci_dev->driver_data = pnp_get_drvdata(pnp_dev);
> > > +	pci_dev->irq = DEV_IRQ(pnp_dev, 0);
> > > +	pci_set_dma_mask(pci_dev, 0x00ffffff);
> > > +}
> > >
> > > -static int __init pnpide_generic_init(struct pci_dev *dev, int enable)
> > > +/* Generic initialisation function for ISA PnP IDE interface */
> > > +static int pnpide_generic_init(struct idepnp_private *device, int
> > > enable) {
> > >  	hw_regs_t hw;
> > >  	ide_hwif_t *hwif;
> > >  	int index;
> > > +	struct pnp_dev *dev = device->dev;
> > >
> > > -	if (!enable)
> > > +	if (!enable) {
> > > +		/* nothing to do for now */
> > >  		return 0;
> > > +	}
> > >
> > >  	if (!(DEV_IO(dev, 0) && DEV_IO(dev, 1) && DEV_IRQ(dev, 0)))
> > > -		return 1;
> > > +		return -EINVAL;
> > >
> > >  	ide_setup_ports(&hw, (ide_ioreg_t) DEV_IO(dev, 0),
> > >  			generic_ide_offsets,
> > >  			(ide_ioreg_t) DEV_IO(dev, 1),
> > >  			0, NULL,
> > > -//			generic_pnp_ide_iops,
> > > +			/* generic_pnp_ide_iops, */
> > >  			DEV_IRQ(dev, 0));
> > >
> > >  	index = ide_register_hw(&hw, &hwif);
> > >
> > >  	if (index != -1) {
> > >  	    	printk(KERN_INFO "ide%d: %s IDE interface\n", index,
> > > DEV_NAME(dev)); -		hwif->pci_dev = dev;
> > > +		hwif->pci_dev = &device->pci_dev;
> > >  		return 0;
> > >  	}
> > >
> > > -	return 1;
> > > +	return -ENODEV;
> > >  }
> > >
> > >  /* Add your devices here :)) */
> > > -struct pnp_dev_t idepnp_devices[] __initdata = {
> > > -  	/* Generic ESDI/IDE/ATA compatible hard disk controller */
> > > -	{	ISAPNP_ANY_ID, ISAPNP_ANY_ID,
> > > -		ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_DEVICE(0x0600),
> > > -		pnpide_generic_init },
> > > -	{	0 }
> > > +#define IDEPNP_GENERIC_INIT	0
> > > +static const struct pnp_device_id pnp_ide_devs[] = {
> > > +	/* Generic ESDI/IDE/ATA compatible hard disk controller */
> > > +	{"PNP0600", IDEPNP_GENERIC_INIT},
> > > +	{"", 0}
> > >  };
> > >
> > >  #define NR_PNP_DEVICES 8
> > > -struct pnp_dev_inst {
> > > -	struct pci_dev *dev;
> > > -	struct pnp_dev_t *dev_type;
> > > -};
> > > -static struct pnp_dev_inst devices[NR_PNP_DEVICES];
> > > -static int pnp_ide_dev_idx = 0;
> > > +/* Nb. pnpide_generic_init is indexed as IDEPNP_GENERIC_INIT */
> > > +static int (*init_functions[])(struct idepnp_private *device, int
> > > enable) = {pnpide_generic_init}; +static struct idepnp_private
> > > devices[NR_PNP_DEVICES];
> > > +static int pnp_ide_dev_idx;
> > >
> > >  /*
> > >   * Probe for ISA PnP IDE interfaces.
> > >   */
> > > -
> > > -void __init pnpide_init(int enable)
> > > +static int pnp_ide_probe(struct pnp_dev *pdev, const struct
> > > pnp_device_id *dev_id) {
> > > -	struct pci_dev *dev = NULL;
> > > -	struct pnp_dev_t *dev_type;
> > > +	int ret;
> > > +	struct idepnp_private *p;
> > >
> > > -	if (!isapnp_present())
> > > -		return;
> > > +	/*
> > > +	 * Register device in the array to
> > > +	 * deactivate it on a module unload.
> > > +	 */
> > > +	if (pnp_ide_dev_idx >= NR_PNP_DEVICES)
> > > +		return -ENOSPC;
> > > +
> > > +	p = &devices[pnp_ide_dev_idx];
> > > +	p->init_fn = init_functions[dev_id->driver_data];
> > > +	p->dev = pdev;
> > > +	pnp_set_drvdata(pdev, p);
> > > +	pnp_to_pci(p->dev, &p->pci_dev);
> > > +	ret = p->init_fn(p, 1);
> > > +	if (!ret)
> > > +		pnp_ide_dev_idx++;
> > > +
> > > +	return ret;
> > > +}
> > >
> > > -	/* Module unload, deactivate all registered devices. */
> > > -	if (!enable) {
> > > -		int i;
> > > -		for (i = 0; i < pnp_ide_dev_idx; i++) {
> > > -			dev = devices[i].dev;
> > > -			devices[i].dev_type->init_fn(dev, 0);
> > > -			if (dev->deactivate)
> > > -				dev->deactivate(dev);
> > > -		}
> > > -		return;
> > > -	}
> > > +static void pnp_ide_remove(struct pnp_dev *dev)
> > > +{
> > > +	struct idepnp_private *p = pnp_get_drvdata(dev);
> > > +
> > > +	/* if p is null you have a bug elsewhere */
> > > +	p->init_fn(p, 0);
> > > +	pnp_ide_dev_idx--;
> > > +	return;
> > > +}
> > >
> > > -	for (dev_type = idepnp_devices; dev_type->vendor; dev_type++) {
> > > -		while ((dev = isapnp_find_dev(NULL, dev_type->vendor,
> > > -			dev_type->device, dev))) {
> > > -
> > > -			if (dev->active)
> > > -				continue;
> > > -
> > > -       			if (dev->prepare && dev->prepare(dev) < 0) {
> > > -				printk(KERN_ERR"ide-pnp: %s prepare failed\n", DEV_NAME(dev));
> > > -				continue;
> > > -			}
> > > -
> > > -			if (dev->activate && dev->activate(dev) < 0) {
> > > -				printk(KERN_ERR"ide: %s activate failed\n", DEV_NAME(dev));
> > > -				continue;
> > > -			}
> > > -
> > > -			/* Call device initialization function */
> > > -			if (dev_type->init_fn(dev, 1)) {
> > > -				if (dev->deactivate(dev))
> > > -					dev->deactivate(dev);
> > > -			} else {
> > > -#ifdef MODULE
> > > -				/*
> > > -				 * Register device in the array to
> > > -				 * deactivate it on a module unload.
> > > -				 */
> > > -				if (pnp_ide_dev_idx >= NR_PNP_DEVICES)
> > > -					return;
> > > -				devices[pnp_ide_dev_idx].dev = dev;
> > > -				devices[pnp_ide_dev_idx].dev_type = dev_type;
> > > -				pnp_ide_dev_idx++;
> > > -#endif
> > > -			}
> > > -		}
> > > -	}
> > > +static struct pnp_driver idepnp_driver = {
> > > +	.name		= "ide-pnp",
> > > +	.id_table	= pnp_ide_devs,
> > > +	.probe		= pnp_ide_probe,
> > > +	.remove		= pnp_ide_remove
> > > +};
> > > +
> > > +void pnpide_init(int enable)
> > > +{
> > > +	if (enable)
> > > +		pnp_register_driver(&idepnp_driver);
> > > +	else
> > > +		pnp_unregister_driver(&idepnp_driver);
> > >  }
> > > +

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:31    [from the cache]
©2003-2008