[lkml]   [2002]   [Dec]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: Alot of DMA errors in 2.4.18, 2.4.20 and 2.5.52
    On Wed, Dec 25, 2002 at 12:58:20PM +0100, Tomas Szepe wrote:
    > > For some funny reason, a 2.4.20 kernel refuses to set the DMA-level on
    > > the new disks (all connected to a UDMA5-capable Ultra100 TX2 controller)
    > > to UDMA5,4,3 and settles it for UDMA2, which is the highest possibility
    > > for the OLD onboard-controller (but NOT for the promise card).
    > You need to boot 2.4.19 and 2.4.20 with 'ideX=ata66' where X is the
    > number of the channel where you wish to use transfer modes above UDMA2.
    > For instance, "ide0=ata66 ide1=ata66" will do the trick for the first two

    hdparm -X69 /dev/hda will put it into UDMA5/ata100 mode as well
    (69 == 64 + UDMA mode). No need to specify it at boot time.

    (this discussion reminded me of my own TX2 adapter and 100GB disk:
    adjusting its setting improved sequential disk reads: now 36MB/sec
    instead of 24MB/sec)

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:31    [W:0.020 / U:39.688 seconds]
    ©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site