Messages in this thread |  | | | From | "David A. Chappel" <> | | Subject | PROBLEM: Oops during high ide io loads. | | Date | Thu, 19 Dec 2002 16:05:00 -0700 |
| |
Oops occurs under high disk load under stock 2.4.20 kernel (Alan's version too.) ========================================================= Oops occurs under high disk usage. Simultaniously ripping of one cd and creating another iso file off of an nfs share. (oggenc, cdparanoia, mkisofs, xcdroast) I use and have ide-scsi compiled into my kernel and have an all-ide system. ========================================================= [root@Perky root]# cat /proc/version Linux version 2.4.20 (root@Perky.Davids.local) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #11 SMP Thu Dec 19 13:00:17 MST 2002 ========================================================= I was able to get a couple pictures: ; ) http://home.attbi.com/~bobzibub/oops/oops1.jpg http://home.attbi.com/~bobzibub/oops/oops2.jpg
Stack: 00000000 ffffffff ffffffff ffffffff ffffffff 00000001 00000000 de4c0000 de4c1e98 c02c0b95 de4c1e3c 00000001 00000001 c02dfc0c 00000000 de4c0000 de4c1e98 ffffffff ffff0018 ffff0018 ffffffef c0114425 00000010 00000282 Call Trace: [<c0115525>] Code: f7 f1 50 e8 99 fd ff ff 8b 83 40 df 30 c0 89 83 c0 de 30 c0 <1>Unable to handle kernel paging requiest at virtual address e0000000 printing eip: c0209847 *pde = 00000000 ========================================================= [root@Perky root]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 6 cpu MHz : 998.374 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1992.29
processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 8 model name : Pentium III (Coppermine) stepping : 6 cpu MHz : 998.374 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 1992.29 ========================================================= [root@Perky root]# cat /proc/modules
=========================================================
(The CDs/ hard drives are attached to the HPT370 not the VIA adapter)
[root@Perky root]# cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 02f8-02ff : serial(auto) 0378-037a : parport0 03c0-03df : vga+ 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] 6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] c000-c00f : VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE c000-c007 : ide0 c008-c00f : ide1 c400-c41f : VIA Technologies, Inc. USB c400-c41f : usb-uhci c800-c81f : VIA Technologies, Inc. USB (#2) c800-c81f : usb-uhci cc00-ccff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100 cc00-ccff : tulip d000-d03f : Ensoniq 5880 AudioPCI d000-d03f : es1371 d400-d407 : Triones Technologies, Inc. HPT366/368/370/370A/372 d400-d407 : ide2 d800-d803 : Triones Technologies, Inc. HPT366/368/370/370A/372 d802-d802 : ide2 dc00-dc07 : Triones Technologies, Inc. HPT366/368/370/370A/372 dc00-dc07 : ide3 e000-e003 : Triones Technologies, Inc. HPT366/368/370/370A/372 e002-e002 : ide3 e400-e4ff : Triones Technologies, Inc. HPT366/368/370/370A/372 e400-e407 : ide2 e408-e40f : ide3 e410-e4ff : HPT370A ========================================================= [root@Perky root]# cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-1ffeffff : System RAM 00100000-002b9a95 : Kernel code 002b9a96-0034f45f : Kernel data 1fff0000-1fff2fff : ACPI Non-volatile Storage 1fff3000-1fffffff : ACPI Tables c0000000-cfffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] d0000000-dfffffff : PCI Bus #01 d0000000-d7ffffff : nVidia Corporation NV25 [GeForce4 Ti4400] d8000000-d807ffff : nVidia Corporation NV25 [GeForce4 Ti4400] e0000000-e1ffffff : PCI Bus #01 e0000000-e0ffffff : nVidia Corporation NV25 [GeForce4 Ti4400] e3000000-e30003ff : Linksys Network Everywhere Fast Ethernet 10/100 model NC100 e3000000-e30003ff : tulip fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved [root@Perky root]# ========================================================= [root@Perky root]# lspci -vvv bash: lspci: command not found [root@Perky root]# /sbin/lspci -vvv 00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev c4) Subsystem: ABIT Computer Corp.: Unknown device a204 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 8 Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: e0000000-e1ffffff Prefetchable memory behind bridge: d0000000-dfffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: ABIT Computer Corp.: Unknown device 0000 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. Bus Master IDE Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at c000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at c400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at c800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 11 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 Ethernet controller: Bridgecom, Inc: Unknown device 0985 (rev 11) Subsystem: Bridgecom, Inc: Unknown device 0574 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (63750ns min, 63750ns max), cache line size 08 Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at cc00 [size=256] Region 1: Memory at e3000000 (32-bit, non-prefetchable) [size=1K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=100mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0c.0 Multimedia audio controller: Ensoniq CT5880 [AudioPCI] (rev 02) Subsystem: Ensoniq: Unknown device 8001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at d000 [size=64] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.0 Unknown mass storage controller: HighPoint Technologies, Inc. HPT366/370 UltraDMA 66/100 IDE Controller (rev 04) Subsystem: HighPoint Technologies, Inc.: Unknown device 0001 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 120 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at d400 [size=8] Region 1: I/O ports at d800 [size=4] Region 2: I/O ports at dc00 [size=8] Region 3: I/O ports at e000 [size=4] Region 4: I/O ports at e400 [size=256] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 0251 (rev a2) (prog-if 00 [VGA]) Subsystem: VISIONTEK: Unknown device 003c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] Region 2: Memory at d8000000 (32-bit, prefetchable) [size=512K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none> [root@Perky root]# ========================================================= <Extract from System.map> c0208a30 T ide_scan_pio_blacklist c0208ab0 T ide_get_best_pio_mode c0208c10 t init_hwif_data c0208de0 T drive_is_flashcard c0208f10 T ide_system_bus_speed c0208f80 T ide_input_data <------------------- c0209060 T ide_output_data c0209130 T atapi_input_bytes c02091a0 T atapi_output_bytes c0209210 T drive_is_ready c0209260 T ide_end_request c0209370 T ide_set_handler c0209450 T current_capacity c0209480 T ide_geninit c0209510 t atapi_reset_pollfunc c02095e0 t reset_pollfunc c0209740 t check_dma_crc c02097c0 t pre_reset ========================================================= (gdb) disassemble ide_input_data
Dump of assembler code for function ide_input_data: 0xc0208f80 <ide_input_data>: push %ebp 0xc0208f81 <ide_input_data+1>: mov %esp,%ebp 0xc0208f83 <ide_input_data+3>: push %edi 0xc0208f84 <ide_input_data+4>: push %esi 0xc0208f85 <ide_input_data+5>: push %ebx 0xc0208f86 <ide_input_data+6>: sub $0xc,%esp 0xc0208f89 <ide_input_data+9>: mov 0x8(%ebp),%esi 0xc0208f8c <ide_input_data+12>: mov 0xc(%ebp),%edi 0xc0208f8f <ide_input_data+15>: mov 0x10(%ebp),%ebx 0xc0208f92 <ide_input_data+18>: mov 0xfc(%esi),%edx 0xc0208f98 <ide_input_data+24>: mov 0x320(%edx),%eax 0xc0208f9e <ide_input_data+30>: mov %edx,%ecx 0xc0208fa0 <ide_input_data+32>: test %eax,%eax 0xc0208fa2 <ide_input_data+34>: je 0xc0208fb0 <ide_input_data+48> 0xc0208fa4 <ide_input_data+36>: push %ebx 0xc0208fa5 <ide_input_data+37>: push %edi 0xc0208fa6 <ide_input_data+38>: push %esi 0xc0208fa7 <ide_input_data+39>: push $0x0 0xc0208fa9 <ide_input_data+41>: call *%eax 0xc0208fab <ide_input_data+43>: jmp 0xc020904a <ide_input_data+202> 0xc0208fb0 <ide_input_data+48>: movzbl 0xd5(%esi),%eax 0xc0208fb7 <ide_input_data+55>: test %al,%al 0xc0208fb9 <ide_input_data+57>: je 0xc0208ff0 <ide_input_data+112> 0xc0208fbb <ide_input_data+59>: and $0x2,%eax 0xc0208fbe <ide_input_data+62>: je 0xc0208fe0 <ide_input_data+96> 0xc0208fc0 <ide_input_data+64>: pushf 0xc0208fc1 <ide_input_data+65>: popl 0xffffffe8(%ebp) 0xc0208fc4 <ide_input_data+68>: cli 0xc0208fc5 <ide_input_data+69>: mov 0xfc(%esi),%esi 0xc0208fcb <ide_input_data+75>: movzwl 0xc(%esi),%edx 0xc0208fcf <ide_input_data+79>: in (%dx),%al 0xc0208fd0 <ide_input_data+80>: in (%dx),%al 0xc0208fd1 <ide_input_data+81>: in (%dx),%al 0xc0208fd2 <ide_input_data+82>: movzwl 0x8(%esi),%edx 0xc0208fd6 <ide_input_data+86>: mov %ebx,%ecx 0xc0208fd8 <ide_input_data+88>: repz insl (%dx),%es:(%edi) 0xc0208fda <ide_input_data+90>: pushl 0xffffffe8(%ebp) 0xc0208fdd <ide_input_data+93>: popf 0xc0208fde <ide_input_data+94>: jmp 0xc020904a <ide_input_data+202> 0xc0208fe0 <ide_input_data+96>: movzwl 0x8(%edx),%edx 0xc0208fe4 <ide_input_data+100>: mov %ebx,%ecx 0xc0208fe6 <ide_input_data+102>: repz insl (%dx),%es:(%edi) 0xc0208fe8 <ide_input_data+104>: jmp 0xc020904a <ide_input_data+202> 0xc0208fea <ide_input_data+106>: lea 0x0(%esi),%esi 0xc0208ff0 <ide_input_data+112>: cmpb $0x0,0xba(%esi) 0xc0208ff7 <ide_input_data+119>: je 0xc0209040 <ide_input_data+192> 0xc0208ff9 <ide_input_data+121>: dec %ebx 0xc0208ffa <ide_input_data+122>: cmp $0xffffffff,%ebx 0xc0208ffd <ide_input_data+125>: je 0xc020904a <ide_input_data+202> 0xc0208fff <ide_input_data+127>: jmp 0xc0209010 <ide_input_data+144> 0xc0209001 <ide_input_data+129>: mov 0xfc(%esi),%ecx 0xc0209007 <ide_input_data+135>: mov %esi,%esi 0xc0209009 <ide_input_data+137>: lea 0x0(%edi,1),%edi 0xc0209010 <ide_input_data+144>: movzwl 0x8(%ecx),%edx 0xc0209014 <ide_input_data+148>: in (%dx),%ax 0xc0209016 <ide_input_data+150>: out %al,$0x80 0xc0209018 <ide_input_data+152>: mov %ax,(%edi) 0xc020901b <ide_input_data+155>: add $0x2,%edi 0xc020901e <ide_input_data+158>: mov 0xfc(%esi),%eax 0xc0209024 <ide_input_data+164>: movzwl 0x8(%eax),%edx 0xc0209028 <ide_input_data+168>: in (%dx),%ax 0xc020902a <ide_input_data+170>: out %al,$0x80 0xc020902c <ide_input_data+172>: mov %ax,(%edi) 0xc020902f <ide_input_data+175>: dec %ebx 0xc0209030 <ide_input_data+176>: add $0x2,%edi 0xc0209033 <ide_input_data+179>: cmp $0xffffffff,%ebx 0xc0209036 <ide_input_data+182>: jne 0xc0209001 <ide_input_data+129> 0xc0209038 <ide_input_data+184>: jmp 0xc020904a <ide_input_data+202> 0xc020903a <ide_input_data+186>: lea 0x0(%esi),%esi 0xc0209040 <ide_input_data+192>: movzwl 0x8(%edx),%edx 0xc0209044 <ide_input_data+196>: lea (%ebx,%ebx,1),%ecx 0xc0209047 <ide_input_data+199>: repz insw (%dx),%es:(%edi)
0xc020904a <ide_input_data+202>: lea 0xfffffff4(%ebp),%esp 0xc020904d <ide_input_data+205>: pop %ebx 0xc020904e <ide_input_data+206>: pop %esi 0xc020904f <ide_input_data+207>: pop %edi 0xc0209050 <ide_input_data+208>: pop %ebp 0xc0209051 <ide_input_data+209>: ret End of assembler dump. ========================================================= I was running TOP remotely at the time too...
1:44pm up 16 min, 4 users, load average: 2.10, 1.78, 1.02 53 processes: 50 sleeping, 3 running, 0 zombie, 0 stopped CPU0 states: 56.0% user, 26.2% system, 55.1% nice, 16.4% idle CPU1 states: 24.5% user, 30.3% system, 23.3% nice, 44.2% idle Mem: 515348K av, 484460K used, 30888K free, 0K shrd, 22104K buff Swap: 409616K av, 0K used, 409616K free 423944K cached PID USER PRI NI SIZE RSS SHARE STAT %CPU %MEM TIME COMMAND [garbled due to disconnect] 0 2004 2004 824 R N 97.9 0.3 0:17 oggenc 5519 root 15 10 2608 2576 504 S N 7.5 0.4 0:01 cdparanoia 5520 root 9 0 4020 4020 3224 S 2.1 0.7 0:00 gaim 2967 root 9 0 848 848 560 D 1.5 0.1 0:11 mkisofs 2463 root 9 0 5160 5160 3084 R 1.1 1.0 0:03 xcdroast 2347 root 9 0 2336 2316 1700 S 0.9 0.4 0:01 sshd 3269 root 9 0 1040 1040 836 R 0.3 0.2 0:01 top 12 root 9 0 0 0 0 SW 0.1 0.0 0:00 kjournald 904 root 9 0 1804 1804 1296 S 0.1 0.3 0:00 cupsd 1 root 8 0 520 520 452 S 0.0 0.1 0:04 init 2 root 9 0 0 0 0 SW 0.0 0.0 0:00 keventd 3 root 18 19 0 0 0 SWN 0.0 0.0 0:00 ksoftirqd_CPU0 4 root 18 19 0 0 0 SWN 0.0 0.0 0:00 ksoftirqd_CPU1 5 root 9 0 0 0 0 SW 0.0 0.0 0:00 kswapd 6 root 9 0 0 0 0 SW 0.0 0.0 0:00 bdflush
========================================================= Please let me know if you'd like me to reproduce it and follow some procedure.
Thanks! -bobzibub
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |