Messages in this thread | | | Subject | Trident/ALi 5451 problem, 2.4.20-ac2 | From | Ian Soboroff <> | Date | Wed, 18 Dec 2002 08:38:31 -0500 |
| |
Just tried 2.4.20-ac2 on my Fujitsu P-2040, and it seems to have a problem initializing the sound:
(from dmesg)
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 17:35:49 Dec 16 2002 PCI: Found IRQ 9 for device 00:04.0 trident: ALi Audio Accelerator found at IO 0x1000, IRQ 9 ALi 5451 did not come out of reset. trident_ac97_init: error resetting 5451.
I'm attaching the full dmesg below. trident is compiled into the kernel.
Thanks in advance, (and, Alan, the ALi IDE init works fine now, thanks!)
Ian
Linux version 2.4.20-ac2 (root@euphrates) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 Mon Dec 16 17:31:17 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c000 (usable) BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e7400 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000016fe0000 (usable) BIOS-e820: 0000000016fe0000 - 0000000016fefc00 (ACPI data) BIOS-e820: 0000000016fefc00 - 0000000016ff0000 (ACPI NVS) BIOS-e820: 0000000016ff0000 - 0000000017100000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 367MB LOWMEM available. On node 0 totalpages: 94176 zone(0): 4096 pages. zone(1): 90080 pages. zone(2): 0 pages. Kernel command line: ro hdc=ide-scsi ide_setup: hdc=ide-scsi No local APIC present or hardware disabled Initializing CPU#0 Detected 859.299 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1703.93 BogoMIPS Memory: 367128k/376704k available (1334k kernel code, 7000k reserved, 491k data, 116k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) ramfs: mounted with options: <defaults> ramfs: max_pages=46163 max_file_pages=0 max_inodes=0 max_dentries=46163 Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (32 bytes/line) CPU: L2 Cache: 512K (128 bytes/line) CPU: Processor revision 1.4.1.0, 867 MHz CPU: Code Morphing Software revision 4.3.0-9-197 CPU: 20020207 23:55 official release 4.3.0#7 CPU: After generic, caps: 0080893f 0081813f 0000004e 00000000 CPU: Common caps: 0080893f 0081813f 0000004e 00000000 CPU: Transmeta(tm) Crusoe(tm) Processor TM5800 stepping 03 Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: none PCI: PCI BIOS revision 2.10 entry at 0xfd88e, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router ALI [10b9/1533] at 00:07.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled Real Time Clock Driver v1.10e floppy0: no floppy controllers found [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] Initialized r128 2.2.0 20010917 on minor 1 Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ALI15X3: IDE controller at PCI slot 00:0f.0 PCI: No IRQ known for interrupt pin A of device 00:0f.0. Please try using pci=biosirq. ALI15X3: chipset revision 195 ALI15X3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio hda: TOSHIBA MK3018GAP, ATA DISK drive blk: queue c03128c0, I/O limit 4095Mb (mask 0xffffffff) hdc: TOSHIBA DVD-ROM SD-R2212, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 58605120 sectors (30006 MB), CHS=3648/255/63, UDMA(66) Partition check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 > es1371: version v0.30 time 17:35:39 Dec 16 2002 Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 17:35:49 Dec 16 2002 PCI: Found IRQ 9 for device 00:04.0 trident: ALi Audio Accelerator found at IO 0x1000, IRQ 9 ALi 5451 did not come out of reset. trident_ac97_init: error resetting 5451. Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] PCI: Found IRQ 9 for device 00:0c.0 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Yenta IRQ list 0cf8, PCI irq9 Socket status: 30000006 kjournald starting. Commit interval 30 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 116k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub PCI: Found IRQ 11 for device 00:02.0 usb-ohci.c: USB OHCI at membase 0xd781d000, IRQ 11 usb-ohci.c: usb-00:02.0, Acer Laboratories Inc. [ALi] USB 1.1 Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz> hid-core.c: USB HID support drivers EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal Adding Swap: 819272k swap-space (priority -1) kjournald starting. Commit interval 30 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 30 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 30 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,11), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 30 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 578 $ Ben Collins <bcollins@debian.org> PCI: Found IRQ 9 for device 00:13.0 ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[9] MMIO=[fc007000-fc0077ff] Max Packet=[2048] SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1F15 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1F15 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1F15 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1F15 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1F15 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1F15 Type: CD-ROM ANSI SCSI revision: 02 Vendor: TOSHIBA Model: DVD-ROM SD-R2212 Rev: 1F15 Type: CD-ROM ANSI SCSI revision: 02 ieee1394: Host added: Node[00:1023] GUID[00000e1000b029cc] [Linux OHCI-1394] ip_tables: (C) 2000-2002 Netfilter core team 8139too Fast Ethernet driver 0.9.26 PCI: Found IRQ 9 for device 00:10.0 eth0: RealTek RTL8139 Fast Ethernet at 0xd78db800, 00:e0:00:ae:45:01, IRQ 9 eth0: Identified 8139 chip type 'RTL-8139C' eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1. cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0100-0x04ff: excluding 0x408-0x40f 0x480-0x48f 0x4d0-0x4d7 cs: IO port probe 0x0a00-0x0aff: clean.
| |