[lkml]   [2002]   [Dec]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: CD Writing in 2.5.51
    On Wed, 2002-12-11 at 22:46, Markus Plail wrote:
    > * mdew writes:
    > >On Wed, 2002-12-11 at 22:34, Markus Plail wrote:
    > >>You don't need any additional modules. Just don't activate ide-scsi by
    > >>either not appending ide-scsi/scsi=hdX or not compiling ide-scsi
    > >>support in the kernel.
    > >can i completely remove scsi support then? (I dont have any scsi device)
    > Yes.

    awesome, i got it to work, thanks.. tho I'm now trying to enable the DMA
    on the drives... (unsuccessfully)

    /dev/hda == CDRW (24/12/40)
    /dev/hdb == DVDROM (8/40)

    nirvana:~# hdparm /dev/hda

    HDIO_GET_MULTCOUNT failed: Inappropriate ioctl for device
    IO_support = 0 (default 16-bit)
    unmaskirq = 0 (off)
    using_dma = 0 (off)
    keepsettings = 0 (off)
    readonly = 1 (on)
    readahead = 256 (on)
    HDIO_GETGEO failed: Inappropriate ioctl for device
    nirvana:~# hdparm -d1 /dev/hda

    setting using_dma to 1 (on)
    HDIO_SET_DMA failed: Operation not permitted
    using_dma = 0 (off)
    nirvana:~# hdparm -d1 /dev/hdb

    setting using_dma to 1 (on)
    HDIO_SET_DMA failed: Operation not permitted
    using_dma = 0 (off)

    Linux version 2.5.51 (root@nirvana) (gcc version 3.2.2 20021202 (Debian
    prerelease)) #3 Wed Dec 11 23:04:28 NZDT 2002
    Video mode to be used for restore is ffff
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
    BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
    BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    383MB LOWMEM available.
    On node 0 totalpages: 98288
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 94192 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    Building zonelist for node : 0
    Kernel command line: BOOT_IMAGE=Linux25 root=2102
    Local APIC disabled by BIOS -- reenabling.
    Found and enabled local APIC!
    Initializing CPU#0
    Detected 599.229 MHz processor.
    Console: colour VGA+ 80x25
    Calibrating delay loop... 1183.74 BogoMIPS
    Memory: 385044k/393152k available (2329k kernel code, 7352k reserved,
    526k data, 308k init, 0k highmem)
    Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    -> /dev
    -> /dev/console
    -> /root
    CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 128K
    CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
    CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
    CPU: Common caps: 0383fbff 00000000 00000000 00000000
    CPU: Intel Celeron (Coppermine) stepping 03
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 599.0313 MHz.
    ..... host bus clock speed is 66.0590 MHz.
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    mtrr: v2.0 (20020519)
    device class 'cpu': registering
    device class cpu: adding driver system:cpu
    PCI: PCI BIOS revision 2.10 entry at 0xfb240, last bus=1
    PCI: Using configuration type 1
    device class cpu: adding device CPU 0
    interfaces: adding device CPU 0
    BIO: pool of 256 setup, 14Kb (56 bytes/bio)
    biovec pool[0]: 1 bvecs: 256 entries (12 bytes)
    biovec pool[1]: 4 bvecs: 256 entries (48 bytes)
    biovec pool[2]: 16 bvecs: 256 entries (192 bytes)
    biovec pool[3]: 64 bvecs: 256 entries (768 bytes)
    biovec pool[4]: 128 bvecs: 256 entries (1536 bytes)
    biovec pool[5]: 256 bvecs: 256 entries (3072 bytes)
    Linux Plug and Play Support v0.93 (c) Adam Belay
    PnPBIOS: Found PnP BIOS installation structure at 0xc00fbe30
    PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbe58, dseg 0xf0000
    PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
    block request queues:
    128 requests per read queue
    128 requests per write queue
    8 requests per batch
    enter congestion at 31
    exit congestion at 33
    drivers/usb/core/usb.c: registered new driver usbfs
    drivers/usb/core/usb.c: registered new driver hub
    PCI: Probing PCI hardware
    PCI: Probing PCI hardware (bus 00)
    PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
    aio_setup: sizeof(struct page) = 40
    [c13de040] eventpoll: successfully initialized.
    Journalled Block Device driver loaded
    udf: registering filesystem
    SGI XFS for Linux 2.5.51 with ACLs, realtime, no debug enabled
    Limiting direct PCI/PCI transfers.
    Serial: 8250/16550 driver $Revision: 1.90 $ IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
    parport0: irq 7 detected
    parport0: cpp_mux: aa55f00f52ad51(3e)
    parport0: cpp_daisy: aa5500ff(38)
    parport0: assign_addrs: aa5500ff(38)
    parport0: cpp_mux: aa55f00f52ad51(3e)
    parport0: cpp_daisy: aa5500ff(38)
    parport0: assign_addrs: aa5500ff(38)
    pty: 256 Unix98 ptys configured
    lp0: using parport0 (polling).
    Linux agpgart interface v1.0 (c) Dave Jones
    agpgart: Detected Intel 440BX chipset
    agpgart: Maximum main memory to use for agp memory: 321M
    agpgart: AGP aperture is 64M @ 0xe0000000
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with
    PIIX4: IDE controller at PCI slot 00:07.1
    PIIX4: chipset revision 1
    PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
    hda: ASUS CRW-2410A, ATAPI CD/DVD-ROM drive
    hdb: ASUS DVD-ROM E608, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    PDC20262: IDE controller at PCI slot 00:0e.0
    PCI: Found IRQ 9 for device 00:0e.0
    PDC20262: chipset revision 1
    PDC20262: not 100% native mode: will probe irqs later
    PDC20262: ROM enabled at 0xe7000000
    PDC20262: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
    ide2: BM-DMA at 0xc000-0xc007, BIOS settings: hde:DMA, hdf:pio
    ide3: BM-DMA at 0xc008-0xc00f, BIOS settings: hdg:DMA, hdh:DMA
    hde: ST330630A, ATA DISK drive
    ide2 at 0xb000-0xb007,0xb402 on irq 9
    hde: setmax LBA 59777641, native 59777640
    hde: 59777640 sectors (30606 MB) w/2048KiB Cache, CHS=59303/16/63,
    hde: hde1 hde2 hde3 hde4 < hde5 >
    drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface
    driver v2.0
    uhci-hcd 00:07.2: Intel Corp. 82371AB/EB/MB PIIX4
    uhci-hcd 00:07.2: irq 10, io base 0000a000
    drivers/usb/core/hcd.c: new USB bus registered, assigned bus number 1
    drivers/usb/core/hub.c: USB hub found at 0
    drivers/usb/core/hub.c: 2 ports detected
    device class 'input': registering
    register interface 'mouse' with class 'input'
    mice: PS/2 mouse device common for all mice
    register interface 'event' with class 'input'
    serio: i8042 AUX port at 0x60,0x64 irq 12
    input: AT Set 2 keyboard on isa0060/serio0
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Advanced Linux Sound Architecture Driver Version 0.9.0rc5 (Sun Nov 10
    19:48:18 2002 UTC).
    request_module[snd-card-0]: not ready
    request_module[snd-card-1]: not ready
    request_module[snd-card-2]: not ready
    request_module[snd-card-3]: not ready
    request_module[snd-card-4]: not ready
    request_module[snd-card-5]: not ready
    request_module[snd-card-6]: not ready
    request_module[snd-card-7]: not ready
    PCI: Found IRQ 5 for device 00:09.0
    ALSA device list:
    #0: Yamaha DS-XG PCI (YMF744) at 0xd8816000, irq 5
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP: routing cache hash table of 4096 buckets, 32Kbytes
    TCP: Hash tables configured (established 32768 bind 65536)
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    UDF-fs DEBUG fs/udf/lowlevel.c:65:udf_get_last_session:
    CDROMMULTISESSION not supported: rc=-25
    UDF-fs DEBUG fs/udf/super.c:1471:udf_fill_super: Multi-session=0
    UDF-fs DEBUG fs/udf/super.c:459:udf_vrs: Starting at sector 16 (2048
    byte sectors)
    UDF-fs: No VRS found
    XFS mounting filesystem ide2(33,2)
    Ending clean XFS mount for filesystem: ide2(33,2)
    VFS: Mounted root (xfs filesystem) readonly.
    Freeing unused kernel memory: 308k freed
    drivers/usb/core/hub.c: new USB device 00:07.2-1, assigned address 2
    drivers/usb/core/hub.c: USB hub found at 1
    drivers/usb/core/hub.c: 4 ports detected
    drivers/usb/core/hub.c: new USB device 00:07.2-2, assigned address 3
    drivers/usb/core/hub.c: USB hub found at 2
    drivers/usb/core/hub.c: 4 ports detected
    Adding 642592k swap on /dev/hde3. Priority:-1 extents:1
    drivers/usb/core/hub.c: new USB device 00:07.2-2.1, assigned address 4
    drivers/usb/core/hub.c: new USB device 00:07.2-1.1, assigned address 5
    drivers/usb/core/hub.c: new USB device 00:07.2-1.3, assigned address 6
    Module crc32 cannot be unloaded due to unsafe usage in lib/crc32.c:554
    8139too Fast Ethernet driver 0.9.26
    PCI: Found IRQ 10 for device 00:0b.0
    eth0: RealTek RTL8139 Fast Ethernet at 0xd887a000, 00:30:4f:0b:43:a8,
    IRQ 10
    eth0: Identified 8139 chip type 'RTL-8139C'
    drivers/usb/core/usb.c: registered new driver usbscanner
    drivers/usb/image/scanner.c: 0.4.6:USB Scanner Driver
    input: A4Tech USB Optical Mouse on usb-00:07.2-1.1
    drivers/usb/core/usb.c: registered new driver usb_mouse
    drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
    NTFS driver 2.1.0 [Flags: R/O MODULE].
    NTFS volume version 3.0.
    eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
    Module smbfs cannot be unloaded due to unsafe usage in
    hda: DMA disabled
    end_request: I/O error, dev hda, sector 0
    hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
    Uniform CD-ROM driver Revision: 3.12
    hdb: DMA disabled
    end_request: I/O error, dev hdb, sector 0
    hdb: ATAPI 40X DVD-ROM drive, 128kB Cache

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:31    [W:0.053 / U:18.348 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site