lkml.org 
[lkml]   [2002]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Prev. mail
On Wed, Nov 27, 2002 at 05:54:39PM +0200, fuzk@heaven.kiyavia.crimea.ua wrote:
> Problem: the system hangs
> The additional information: troubles with controller on hd (hardware problem)

you mean the kernel has to deal with broken hardware (the broken hdc)
in sane way instead of hanging, right?

> After recompiling kernel 2.4.18 with patch 2.4.19 wtere was a trouble:
> The system hangs after loading in place 'Partition check'. Fragment dmesg:
> hdc: SAMSUNG SV0511D, ATA DISK drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hdc: /* hdc: <-- trouble */
>
> In kernel 2.4.18 it was so:
>
> hdc:hdc: timeout waiting for DMA
> ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> hdc: status error: status=0x58 { DriveReady SeekComplete DataRequest }
> hdc: drive not ready for command
> [PTBL] [620/255/63] hdc1 hdc2 hdc3

in case it's needed: "ide1=nodma" in kernel boot line.
Do you have intel piix support compiled in, btw?

> 00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:31    [W:0.078 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site