lkml.org 
[lkml]   [2002]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: PCI serial card with PCI 9052?
    Hi, 

    patch looks good, but here is yet another thing to test.
    We need to know base baudrate of this card. I failed to find
    HT6552 datasheet on Holtek site, so we need another experiment.

    You can test it this way:

    1) connect one port of this card with normal serial port or any
    serial device with known baudrate;
    2) test data transfer, if it fails try to set lower speed on PCI card's port.
    3) if you found needed speed, calculate base baudrate
    <base baudrate> = (<speed of normal port> / <speed of PCI card port>) * 115200

    Good luck.

    --
    Andrey Panin | Embedded systems software developer
    pazke@orbita1.ru | PGP key: wwwkeys.eu.pgp.net
    [unhandled content-type:application/pgp-signature]
    \
     
     \ /
      Last update: 2005-03-22 13:31    [W:0.020 / U:150.520 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site