lkml.org 
[lkml]   [2002]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: How do I re-activate IDE controller (secondary channel) after boot?
On Thu, 14 Nov 2002, Mike Dresser wrote:

> Don't disable the ide channel, set the hard drive type to none in the
> bios, instead of auto.

It was set to none. I emphazise that bios will halt if drive is connected
in 80G mode, regardless of bios setting (Disabling ide-2 will help,
however).

I have found 3 different way to boot machine with this hd so far:
1) jumpper drive to 32G mode
2) disable ide-2 channel
3) don't connect disk's cables at all. =)


BR, Jani

--
Jani Averbach

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:31    [W:0.027 / U:2.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site