Messages in this thread |  | | | Date | Tue, 8 Oct 2002 15:17:58 +0200 | | From | Gregoire Favre <> | | Subject | 2.5.40,41, 41-ac1 no DVD-ROM !!! |
| |
Hello,
like already repported for 2.5.40 I can't access my DVD-ROM with ide-scsi (and poorly without it):
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALL CX13.6A, ATA DISK drive Debug: sleeping function called from illegal context at mm/slab.c:1374 Call Trace: [<c0136f1b>] [<c01ecfd5>] [<c01ed077>] [<c01fec09>] [<c0206580>] [<c01fee43>] [<c0206940>] [<c01ff2c8>] [<c01feaf6>] [<c02106fe>] [<c01fdd97>] [<c010507d>] [<c0105040>] [<c0105675>] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: Pioneer DVD-ROM ATAPIModel DVD-103S 011, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive Debug: sleeping function called from illegal context at mm/slab.c:1374 Call Trace: [<c0136f1b>] [<c01ecfd5>] [<c01ed077>] [<c01fec09>] [<c0206580>] [<c01fee43>] [<c0206940>] [<c01ff2c8>] [<c01feaf6>] [<c021071d>] [<c01fdd97>] [<c010507d>] [<c0105040>] [<c0105675>] ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 26760384 sectors (13701 MB) w/418KiB Cache, CHS=1665/255/63, UDMA(33) /dev/ide/host0/bus0/target0/lun0: p1 p2 ide-floppy driver 0.99.newide hdd: 244766kB, 489532 blocks, 512 sector size hdd: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm hdd: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664 hdd: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664 /dev/ide/host0/bus1/target1/lun0: unknown partition table /dev/ide/host0/bus1/target1/lun0: unknown partition table SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi_eh_offline_sdevs: Device offlined - not ready or command retry failed after error recovery: host 0 channel 0 id 0 lun 0 register interface 'mouse' with class 'input
as all files are to be found under http://ulima.unil.ch/greg/linux/ and that I have already repported it, I won't give more unless spefically demanded ;-))
cdrecord -scanbus don't find anything...
Thank you very much,
Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |