lkml.org 
[lkml]   [2002]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subject2.5.x and 8250 UART problems
I've noticed that 8250 UART based serial port performance is poorer in 2.5.x than 2.4.x and 2.2.x, on a couple of my machines.

The 486 SX-20 with 4 MB RAM, running 2.2.21 reliably achieves about 650 BPS download from another machine, with the port runnnig at 9600 bps. With 2.5.40, many characters are lost at 9600, making, e.g. a ZModem transfer retry for almost every block.

A 486 SX-25 with 8 MB RAM, running 2.4.19 manages about 950 BPS reliably with the port set at 9600 bps. With 2.5.40, there are again a lot of lost characters.

I know these are ancient machines, with rediculously low amounts of memory, but surely 9600 bps should be reliable, even if performance drops to 600-700 BPS, or even lower.

I originally thought that the new kernel was using up memory that was previously available to be used as a buffer, and that extra hard disk access was causing the lost characters, but this doesn't seem to be the case.

John.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:29    [W:0.054 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site