[lkml]   [2002]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [PATCH] scsi_error device offline fix
    On Mon, Oct 21, 2002 at 05:58:04PM -0700, andy barlak wrote:
    > On Mon, 21 Oct 2002, Patrick Mansfield wrote:
    > > Can you turn on all scsi logging - with CONFIG_SCSI_LOGGING enabled,
    > > on your boot command line add a "scsi_logging=1" and send
    > > the output.
    > >
    > > -- Patrick Mansfield
    > Sure. large dmesg buffer required. This produced a 55k file that
    > I will pare down to what I consider informative.

    It looks like the INQUIRY page code 0 is timing out and appears to have
    hung the bus, as all other commands sent to the bus then timeout.

    It's surprising that that would hang the bus.

    That driver really needs at least some basic reset handling.

    Try removing the scsi_load_identifier call in scsi_scan.c and
    see if you can boot. And/or get sg_utils and on your 2.4 system
    send a INQUIRY page 0 to the device, and see if that hangs or
    not, like:

    [patman@elm3a50 sg_utils]$ sudo ./sg_inq -e -o=0 /dev/sg1
    EVPD INQUIRY, page code=0x00:
    Only hex output supported
    00 00 00 00 0c 00 03 80 81 c0 c1 c2 c3 c7 c8 d1 d2 ................

    FYI sg_utils is at:

    -- Patrick Mansfield
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:30    [W:0.019 / U:37.152 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site