Messages in this thread | | | Date | Sun, 20 Oct 2002 17:44:17 +0200 | From | Gregoire Favre <> | Subject | 2.5.44 and IDE, what does that mean? |
| |
Hello,
I got those at boot:
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 00:1f.1 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio hda: IC35L120AVVA07-0, ATA DISK drive IDE init is ugly:Call Trace: [<c0264791>] [<c0261203>] [<c02612ae>] [<c0261317>] [<c02704ae>] [<c027058e>] [<c02706f0>] [<c025c81f>] [<c025c9da>] [<c0264500>] [<c025cfd8>] [<c025c6a4>] [<c026e030>] [<c010506a>] [<c0105040>] [<c0105615>] hda: bad special flag: 0x03 IDE init is ugly:Call Trace: [<c0264791>] [<c0261203>] [<c02612ae>] [<c0261317>] [<c0270513>] [<c027058e>] [<c02706f0>] [<c025c81f>] [<c025c9da>] [<c0264500>] [<c025cfd8>] [<c025c6a4>] [<c026e030>] [<c010506a>] [<c0105040>] [<c0105615>] hda: tagged command queueing enabled, command queue depth 32 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 241254720 sectors (123522 MB) w/1863KiB Cache, CHS=15017/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 > ide-floppy driver 0.99.newide hdc: 244766kB, 489532 blocks, 512 sector size hdc: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm hdc: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664 hdc: The disk reports a capacity of 250640384 bytes, but the drive only handles 250609664 /dev/ide/host0/bus1/target0/lun0: unknown partition table /dev/ide/host0/bus1/target0/lun0: unknown partition table SCSI subsystem driver Revision: 1.00
Thank you very much,
Grégoire ________________________________________________________________ http://ulima.unil.ch/greg ICQ:16624071 mailto:greg@ulima.unil.ch - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |