lkml.org 
[lkml]   [2002]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: Kernel Panic 2.4.19 with Segate 80GB HDD
From
Date
On Thu, 2002-10-17 at 20:35, JunHyeok Heo wrote:
> I used kernel 2.4.19 with Segate 80GB HDD (ST380020ACE).
> The kernel could not recognize the number of sectors correctly, and then
> result in kernel panic.
> I tried kernel 2.4.18 with the same HDD, there is no problem.

I've been running 2.4.19 with ALi Magic chipset for a long time, with no
oops or panics related to HDD, FS, or anything.

> Is this a bug in the ide device driver ? or is there any compatible HDD
> list for 2.4.19 kernel ?
>
> The cpu is PentiumIII 700Mhz cpu and
> The chipset of motherboard is Intel BX.
> The IDE controller is INTEL82801BA_9
>
> In case of 2.4.19 kernel, the booting message as follows...
> --
> Linux version 2.4.19 (root@i74) (gcc version 2.95.4 (Debian prerelease)) #2
> Wed
> Oct 16 21:27:55 KST 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000bfeb000 (usable)
> BIOS-e820: 000000000bfeb000 - 000000000bfef000 (ACPI data)
> BIOS-e820: 000000000bfef000 - 000000000bfff000 (reserved)
> BIOS-e820: 000000000bfff000 - 000000000c000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> 191MB LOWMEM available.
> On node 0 totalpages: 49131
> zone(0): 4096 pages.
> zone(1): 45035 pages.
> zone(2): 0 pages.
> Kernel command line: BOOT_IMAGE=host19 ro root=301
> BOOT_FILE=/boot/vmlinuz-2.4.1
> 9 console=ttyS0,9600 console=ttyS0,9600
> Initializing CPU#0
> Detected 706.972 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1412.30 BogoMIPS
> Memory: 192408k/196524k available (1069k kernel code, 3728k reserved, 260k
> data,
> 60k init, 0k highmem)
> Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
> Inode cache hash table entries: 16384 (order: 5, 131072 bytes)
> Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
> Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: Intel Pentium III (Coppermine) stepping 03
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> PCI: PCI BIOS revision 2.10 entry at 0xf0d90, last bus=2
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI en
> abled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> Real Time Clock Driver v1.10e
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH2: IDE controller on PCI bus 00 dev f9
> ICH2: chipset revision 1
> ICH2: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
> hda: ST380020ACE, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
> hda: task_no_data_intr: error=0x04 { DriveStatusError }
> hda: setmax_ext LBA 1, native 0
> hda: 0 sectors (0 MB) w/2048KiB Cache, CHS=0/255/63, UDMA(33)
> PPP generic driver version 2.4.2
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> IP: routing cache hash table of 1024 buckets, 8Kbytes
> TCP: Hash tables configured (established 16384 bind 16384)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> hda1: bad access: block=2, count=2
> end_request: I/O error, dev 03:01 (hda), sector 2
> EXT2-fs: unable to read superblock
> hda1: bad access: block=0, count=1
> end_request: I/O error, dev 03:01 (hda), sector 0
> FAT: unable to read boot sector
> hda1: bad access: block=128, count=1
> end_request: I/O error, dev 03:01 (hda), sector 128
> read_super_block: bread failed (dev 03:01, block 128, size 512)
> hda1: bad access: block=16, count=1
> end_request: I/O error, dev 03:01 (hda), sector 16
> read_super_block: bread failed (dev 03:01, block 16, size 512)
> Kernel panic: VFS: Unable to mount root fs on 03:01
>
> --
>
> In case of 2.4.18 kernel, the booting message as follows...
>
> Linux version 2.4.18 (root@i076) (gcc version 2.95.4 (Debian prerelease)) #5
> Fri Mar 22 19:21:49 KST 2002
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000000bfeb000 (usable)
> BIOS-e820: 000000000bfeb000 - 000000000bfef000 (ACPI data)
> BIOS-e820: 000000000bfef000 - 000000000bfff000 (reserved)
> BIOS-e820: 000000000bfff000 - 000000000c000000 (ACPI NVS)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
> On node 0 totalpages: 49131
> zone(0): 4096 pages.
> zone(1): 45035 pages.
> zone(2): 0 pages.
> Local APIC disabled by BIOS -- reenabling.
> Found and enabled local APIC!
> Kernel command line: BOOT_IMAGE=host18 ro root=301
> BOOT_FILE=/boot/vmlinuz-2.4.18
> Initializing CPU#0
> Detected 706.973 MHz processor.
> Console: colour VGA+ 80x25
> Calibrating delay loop... 1412.30 BogoMIPS
> Memory: 191400k/196524k available (1064k kernel code, 4736k reserved, 287k
> data, 76k init, 0k highmem)
> Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
> Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
> Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
> Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
> CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
> CPU: L1 I cache: 16K, L1 D cache: 16K
> CPU: L2 cache: 256K
> CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
> CPU: Common caps: 0383fbff 00000000 00000000 00000000
> CPU: Intel Pentium III (Coppermine) stepping 03
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> POSIX conformance testing by UNIFIX
> enabled ExtINT on CPU#0
> ESR value before enabling vector: 00000000
> ESR value after enabling vector: 00000000
> Using local APIC timer interrupts.
> calibrating APIC timer ...
> ..... CPU clock speed is 706.9670 MHz.
> ..... host bus clock speed is 100.9952 MHz.
> cpu: 0, clocks: 1009952, slice: 504976
> CPU0<T0:1009952,T1:504976,D:0,S:504976,C:1009952>
> mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
> mtrr: detected mtrr type: Intel
> PCI: PCI BIOS revision 2.10 entry at 0xf0d90, last bus=2
> PCI: Using configuration type 1
> PCI: Probing PCI hardware
> Unknown bridge resource 0: assuming transparent
> PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> pty: 256 Unix98 ptys configured
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI enabled
> ttyS00 at 0x03f8 (irq = 4) is a 16550A
> ttyS01 at 0x02f8 (irq = 3) is a 16550A
> request_module[parport_lowlevel]: Root fs not mounted
> lp: driver loaded but no devices found
> ppdev: user-space parallel port driver
> block: 128 slots per queue, batch=32
> Uniform Multi-Platform E-IDE driver Revision: 6.31
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev f9
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
> hda: ST380020ACE, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33)
> Partition check:
> hda: hda1
> PPP generic driver version 2.4.1
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP
> IP: routing cache hash table of 1024 buckets, 8Kbytes
> TCP: Hash tables configured (established 16384 bind 16384)
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> FAT: bogus logical sector size 0
> reiserfs: checking transaction log (device 03:01) ...
> Using r5 hash to sort names
> ReiserFS version 3.6.25
> VFS: Mounted root (reiserfs filesystem) readonly.
> Freeing unused kernel memory: 76k freed
> 8139too Fast Ethernet driver 0.9.24
> PCI: Found IRQ 10 for device 02:0e.0
> eth0: RealTek RTL8139 Fast Ethernet at 0xcc8b5000, 00:50:fc:3b:2a:76, IRQ 10
> eth0: Identified 8139 chip type 'RTL-8139C'
> eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:30    [from the cache]
©2003-2014 Jasper Spaans. Advertise on this site