lkml.org 
[lkml]   [2002]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Quick question about 2.4.18-pre7.
On Wed, Jan 23, 2002 at 10:29:22PM -0500, Justin Piszcz wrote:
> - Fix 3dfx fb crash with high pixelclock (Jurriaan on Alpha)
>
> I see that there is a 3DFX fix with high pixelclock.
>
> Without the fix, could this be a reason why my machine locks up when
> I am scrolling through various MPG or DIVX movies with mplayer
> (sometimes)?
>
> I have a 3DFX Voodoo 3 3000 AGP.
>
I wrote the fix, so here goes:

the fix only applies if you run your DAC at over half the maximum speed.
That means that with a Voodoo 3 you'd need a 150 MHz pixelclock to
trigger it. If you run linux using no framebuffer or a framebuffer at
frequencies below that, nothing is changed, and you'll need to find
another culprit. If you run above that, you could try to copy in
tdfxfb.c from the previous version. If that fixes it, I've got a
problem.

Anybody with a voodoo card and running high-frequency framebuffer:
please post your experiences.

Thanks,
Jurriaan
--
***************************** WARNING *****************************
Linux should not be used by those under the influence of MicroSoft.
May cause dissiness or vertigo. Consult your tech support before
using Linux. (note--after using Linux, you may notice extreme dis-
comfort when using MicroSoft. Discontinue use of Microsoft.)
***************************** WARNING *****************************
GNU/Linux 2.4.18-pre6 on Debian/Alpha 64-bits 990 bogomips load:0.03 0.22 0.18
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:15    [W:0.048 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site