lkml.org 
[lkml]   [2002]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectOops et all
Date
Hello, I'm not sure if I'm actually sending this to the right address but 
from what I could deduce I should be at least close ;)

I recieved an error from syslog today after trying to run the newest version
of LAME (whic I had been running previously with no error). Recent changes
to the machine include enabling a workaround for AMD processors as well as
changing vfs to nomount:
<from my lilo.conf line>
append=" hdd=ide-scsi devfs=nomount mem=nopentium quiet"

After recieving the error I followed the instructions as best as possible to
report this all properly. The initial part of the following are the lines
taken from syslog, then the result of ksysmoops and finally some system
specific information I've included as well as what I traced the EIP output
to. Please let me know if this is enough information. Also ... the result of
this was lame would run (or appear in the proc list) but there was no
output. I use LAME for streaming a couple of different on-the-fly mp3
streams. Heres the info I have:

OUPUT FROM SYSLOG:
# cat Oops.log
swap_free: Unused swap offset entry 0000d400
Unable to handle kernel paging request at virtual address 69d004f8
printing eip:
c0130044
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c0130044>] Not tainted
EFLAGS: 00010202
eax: 0000ff75 ebx: e0750034 ecx: 00000000 edx: 00000002
esi: e0fae000 edi: e07500cc ebp: e0faff3c esp: e0faff2c
ds: 0018 es: 0018 ss: 0018
Process liveice (pid: 1854, stackpage=e0faf000)
Stack: 00000000 e0fa0000 00000000 00000000 00000000 e0fae000 e1a5a930
e1a5a930
e1a5a92c e07559cc 00001000 e0fae000 c0136224 e07559cc fffffff5
00000000
e0feede4 ffffffea 00000000 00001000 c012ec05 e0feede4 bfffd840
00001000
Call Trace: [<c0136224>] [<c012ec05>] [<c011aaa2>] [<c0106ceb>]

Code: 10 83 c4 04 5b 89 d0 5e 5f 5d c3 90 56 53 8b 5c 24 0c 8b 74
<1>Unable to handle kernel paging request at virtual address 7fffffff
printing eip:
c0110dbc
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0110dbc>] Not tainted
EFLAGS: 00010046
eax: 00000001 ebx: 7fffffff ecx: fffffffe edx: 7fffffff
esi: 00000046 edi: 00000001 ebp: e0a23e54 esp: e0a23e3c
ds: 0018 es: 0018 ss: 0018
Process lame (pid: 1855, stackpage=e0a23000)
Stack: 00000282 00000001 e1a5a92c e1a5a92c e07559cc e07559cc e46f34d8
c0136761
e62d82f4 c1a0e4bc c01367de e07559cc 00000001 00000001 c012f78d
e07559cc
e62d82f4 e1018bfc 00000001 00000000 c1a0f148 e62d82f4 00000000
00000001
Call Trace: [<c0136761>] [<c01367de>] [<c012f78d>] [<c012e7d2>] [<c01158bc>]
[<c0115e9b>] [<c0110d01>] [<c011b0fa>] [<c0106b8f>] [<c0136459>]
[<c0136459>]
[<c012ed01>] [<c0106d24>]

Code: 8b 03 89 c2 0f 0d 02 8b 45 f0 83 c0 04 39 c3 75 93 ff 75 e8

RESULT OF RUNNING KSYSMOOPS

ksymoops 2.4.3 on i686 2.4.17. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.17/ (default)
-m /usr/src/linux/System.map (default)

Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.

Unable to handle kernel paging request at virtual address 69d004f8
c0130044
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<c0130044>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010202
eax: 0000ff75 ebx: e0750034 ecx: 00000000 edx: 00000002
esi: e0fae000 edi: e07500cc ebp: e0faff3c esp: e0faff2c
ds: 0018 es: 0018 ss: 0018
Process liveice (pid: 1854, stackpage=e0faf000)
Stack: 00000000 e0fa0000 00000000 00000000 00000000 e0fae000 e1a5a930
e1a5a930
e1a5a92c e07559cc 00001000 e0fae000 c0136224 e07559cc fffffff5
00000000
e0feede4 ffffffea 00000000 00001000 c012ec05 e0feede4 bfffd840
00001000
Call Trace: [<c0136224>] [<c012ec05>] [<c011aaa2>] [<c0106ceb>]
Code: 10 83 c4 04 5b 89 d0 5e 5f 5d c3 90 56 53 8b 5c 24 0c 8b 74

>>EIP; c0130044 <get_hash_table+84/90> <=====
Trace; c0136224 <pipe_read+b4/210>
Trace; c012ec04 <sys_read+94/d0>
Trace; c011aaa2 <sys_alarm+32/50>
Trace; c0106cea <system_call+32/38>
Code; c0130044 <get_hash_table+84/90>
00000000 <_EIP>:
Code; c0130044 <get_hash_table+84/90> <=====
0: 10 83 c4 04 5b 89 adc %al,0x895b04c4(%ebx) <=====
Code; c013004a <get_hash_table+8a/90>
6: d0 5e 5f rcrb 0x5f(%esi)
Code; c013004c <get_hash_table+8c/90>
9: 5d pop %ebp
Code; c013004e <get_hash_table+8e/90>
a: c3 ret
Code; c013004e <get_hash_table+8e/90>
b: 90 nop
Code; c0130050 <buffer_insert_inode_queue+0/40>
c: 56 push %esi
Code; c0130050 <buffer_insert_inode_queue+0/40>
d: 53 push %ebx
Code; c0130052 <buffer_insert_inode_queue+2/40>
e: 8b 5c 24 0c mov 0xc(%esp,1),%ebx
Code; c0130056 <buffer_insert_inode_queue+6/40>
12: 8b 74 00 00 mov 0x0(%eax,%eax,1),%esi

<1>Unable to handle kernel paging request at virtual address 7fffffff
c0110dbc
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<c0110dbc>] Not tainted
EFLAGS: 00010046
eax: 00000001 ebx: 7fffffff ecx: fffffffe edx: 7fffffff
esi: 00000046 edi: 00000001 ebp: e0a23e54 esp: e0a23e3c
ds: 0018 es: 0018 ss: 0018
Process lame (pid: 1855, stackpage=e0a23000)
Stack: 00000282 00000001 e1a5a92c e1a5a92c e07559cc e07559cc e46f34d8
c0136761
e62d82f4 c1a0e4bc c01367de e07559cc 00000001 00000001 c012f78d
e07559cc
e62d82f4 e1018bfc 00000001 00000000 c1a0f148 e62d82f4 00000000
00000001
Call Trace: [<c0136761>] [<c01367de>] [<c012f78d>] [<c012e7d2>] [<c01158bc>]
[<c0115e9b>] [<c0110d01>] [<c011b0fa>] [<c0106b8f>] [<c0136459>]
[<c0136459>]
[<c012ed01>] [<c0106d24>]
Code: 8b 03 89 c2 0f 0d 02 8b 45 f0 83 c0 04 39 c3 75 93 ff 75 e8

>>EIP; c0110dbc <__wake_up+8c/b0> <=====
Trace; c0136760 <pipe_release+70/90>
Trace; c01367de <pipe_rdwr_release+1e/30>
Trace; c012f78c <fput+4c/d0>
Trace; c012e7d2 <filp_close+52/60>
Trace; c01158bc <put_files_struct+4c/c0>
Trace; c0115e9a <do_exit+aa/1c0>
Trace; c0110d00 <schedule+2e0/310>
Trace; c011b0fa <dequeue_signal+6a/b0>
Trace; c0106b8e <do_signal+22e/2a0>
Trace; c0136458 <pipe_write+d8/280>
Trace; c0136458 <pipe_write+d8/280>
Trace; c012ed00 <sys_write+c0/d0>
Trace; c0106d24 <signal_return+14/18>
Code; c0110dbc <__wake_up+8c/b0>
00000000 <_EIP>:
Code; c0110dbc <__wake_up+8c/b0> <=====
0: 8b 03 mov (%ebx),%eax <=====
Code; c0110dbe <__wake_up+8e/b0>
2: 89 c2 mov %eax,%edx
Code; c0110dc0 <__wake_up+90/b0>
4: 0f 0d 02 prefetch (%edx)
Code; c0110dc2 <__wake_up+92/b0>
7: 8b 45 f0 mov 0xfffffff0(%ebp),%eax
Code; c0110dc6 <__wake_up+96/b0>
a: 83 c0 04 add $0x4,%eax
Code; c0110dc8 <__wake_up+98/b0>
d: 39 c3 cmp %eax,%ebx
Code; c0110dca <__wake_up+9a/b0>
f: 75 93 jne ffffffa4 <_EIP+0xffffffa4> c0110d60
<__wake_up+30/b0>
Code; c0110dcc <__wake_up+9c/b0>
11: ff 75 e8 pushl 0xffffffe8(%ebp)


1 warning issued. Results may not be reliable.

COMMANDS AND OTHER INFORMATION REGARDING MACHINE

/* The Actual EIP lines are stated below.
* The bottom of the report contains
* the closest ranges listed as a result
* of running nm.
* the process that seemed to cause this
* was the newest version of LAME although
* I didn't have a problem until I added
* the boot parameter for the paging issue
* with AMD processors.
* if more data is needed let me know ;)
*/

Kernel Info:

Linux bitch.abyss.za.org 2.4.17 #8 Sun Jan 13 15:19:58 CST 2002 i686 unknown


:r!nm /usr/src/linux/vmlinux | sort | more | grep c0110d
c0110d30 T __wake_up
c0110de0 T __wake_up_sync

:r!nm /usr/src/linux/vmlinux | sort | more | grep c01300
c0130050 T buffer_insert_inode_queue
c0130090 T buffer_insert_inode_data_queue
c01300d0 t __remove_inode_queue
c01300f0 T inode_has_buffers

Any help/information is greatly appreciated :)


/*-------------------------------------------------------*
* Lonny Selinger LPIC-1 Home: (306) 924-5739 *
* Midrange Systems Work: (306) 525-7100 *
* Network Operational Support Site: (306) 657-3854 *
* EDS Canada Ltd. Pager: (866) 862-0627 *
* Regina/Saskatoon Cell: (306) 539-9857 *
* *
* Email: lonny.selinger@eds.com *
* Site Email: lonny.selinger@lightsource.ca *
*-------------------------------------------------------*/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:15    [W:0.028 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site