lkml.org 
[lkml]   [2002]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: via-rhine timeouts
ahhh:)
I managed to find that driver and installed it
(http://www.viaarena.com/?PageID=60)

I transfered a 100M file to someone here via http at 1.1MB/s(according
to IE, which is usually wrong but still)

Seems to be working great now
thanks:)

I wonder if that driver was included on one of those cd's that came with
the board, I never thought to look:)

-Justin

On Tue, Jan 22, 2002 at 07:07:16PM -0600, Andy Carlson wrote:
> I had problems on a Dragon+ using the kernel via-rhine driver. I
> started using the linxfet driver from the viahardware site. Solved all
> my problems. I have not tried the kernel driver since early 2.4 series.
>
> Andy Carlson |\ _,,,---,,_
> naclos@swbell.net ZZZzz /,`.-'`' -. ;-;;,_
> Cat Pics: http://andyc.dyndns.org/animal.html |,4- ) )-,_. ,\ ( `'-'
> St. Louis, Missouri '---''(_/--' `-'\_)
>
>
> On Tue, 22 Jan 2002, Justin A wrote:
>
> > I've been getting many errors due to timeouts, everything was fine while
> > I was at home, but here at school it's a major problem:
> >
> > Jan 22 18:10:00 bouncybouncy kernel: NETDEV WATCHDOG: eth0: transmit
> > timed out
> > Jan 22 18:10:00 bouncybouncy kernel: eth0: Transmit timed out, status
> > 0000, PHY
> > status 782d, resetting...
> > Jan 22 18:10:10 bouncybouncy kernel: NETDEV WATCHDOG: eth0: transmit
> > timed out
> > Jan 22 18:10:10 bouncybouncy kernel: eth0: Transmit timed out, status
> > 0000, PHY
> > status 782d, resetting...
> > Jan 22 18:10:18 bouncybouncy kernel: NETDEV WATCHDOG: eth0: transmit
> > timed out
> > Jan 22 18:10:18 bouncybouncy kernel: eth0: Transmit timed out, status
> > 0000, PHY
> > status 782d, resetting...
> > Jan 22 18:10:26 bouncybouncy kernel: NETDEV WATCHDOG: eth0: transmit
> > timed out
> > Jan 22 18:10:26 bouncybouncy kernel: eth0: Transmit timed out, status
> > 0000, PHY
> > status 782d, resetting...
> > Jan 22 18:10:34 bouncybouncy kernel: NETDEV WATCHDOG: eth0: transmit
> > timed out
> > Jan 22 18:10:34 bouncybouncy kernel: eth0: Transmit timed out, status
> > 0000, PHY
> > status 782d, resetting...
> >
> > Jan 22 18:10:34 bouncybouncy kernel: eth0: reset did not complete in 10
> > ms.
> >
> > once it complains about that, it stops working until I reboot.
> >
> > It seems to happen everytime a large transer is done.(apt-get updgrade
> > -d the last 3 times.)
> >
> > Is this a problem with me, or are the hubs screwy? The hubs I'm on are
> > "smart hubs", lets just say they aren't too bright:)
> >
> > I have a soyo k7vdragon+ using 2.4.17:
> > eth0: VIA VT6102 Rhine-II at 0xe800, 00:50:2c:01:64:a9, IRQ 11.
> > eth0: MII PHY found at address 1, status 0x782d advertising 01e1 Link
> > 0021.
> >
> > CC replies...
> > -Justin
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:15    [from the cache]
©2003-2011 Jasper Spaans