lkml.org 
[lkml]   [2001]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: aic7xxx errors
Date
Em Quarta 05 Setembro 2001 10:04, Frank Schneider escreveu:
> Olaf Zaplinski schrieb:
>
> I had this effect too here (RH7.1, Kernel 2.4.3), but i put it on a
> wrong termination of the LVD Bus...be careful if you have LVD-Drives
> with a "Termination"-Jumper...(e.g. IBM DGHS18V)...this Termination is
> only usable if you use the drive as Single Ended SCSI-UW, *not* if you
> use the drive i a true LVD-environment !
>
> I learnt this the hard way, because i used this "Termination"-jumper and
> the system bootet without problems and ran about 2 weeks...then the
> above errors occured, followed by system crashes....after reading the
> original ibm-docs, and not the oem-reseller-crap, the reason was clear.
>

According to IBM specs, _no LVD drive has terminators built-in_... I have
several servers with LVD drives (all IBM) and none of them has terminators,
even in SE mode. You always have to use an external terminator...

>
> Solong..
> Frank.

--
A year spent in artificial intelligence
is enough to make one believe in God.

-------------------------------
António Miguel F. M. Trindade
System's Administrator
D.E.I. F.C.T.U.C.
-------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:02    [W:0.099 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site