lkml.org 
[lkml]   [2001]   [Sep]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectIDE Problems on SIS 735?
    Hi,
    I've been having repeated DMA problems on my SIS 735 based board, I've done a
    search for the meaning of the error message I'm getting, but I must be looking
    in the wrong places since I can't seem to find something that explains it
    fully. Since this chipset is fairly new I thought I'd mention it here to see
    if anyone has an idea what might be wrong (I'm suspecting the cables, but I've
    already swapped them over once..).

    I've stuck some (possibly) useful/relevant information below. I'm running
    2.4.9-ac7.

    Cheers,
    Adrian.

    (Boot information)
    Uniform Multi-Platform E-IDE driver Revision: 6.31
    ide: Assuming 33MHz system bus speed for PIO modes
    SIS5513: IDE controller on PCI bus 00 dev 15
    SIS5513: chipset revision 208
    SIS5513: not 100% native mode: will probe irqs later
    SiS735
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
    hda: Maxtor 91024U4, ATA DISK drive
    hdb: FUJITSU MPE3064AT, ATA DISK drive
    hdc: Hewlett-Packard CD-Writer Plus 9300, ATAPI CD/DVD-ROM drive
    hdd: Pioneer DVD-ROM ATAPIModel DVD-104S 020, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: 19999728 sectors (10240 MB) w/2048KiB Cache, CHS=1244/255/63, UDMA(66)
    hdb: 12672450 sectors (6488 MB) w/512KiB Cache, CHS=788/255/63, UDMA(33)
    Partition check:
    hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 >
    hdb: hdb1 hdb2 < hdb5 >

    (Error message itself)
    hda: timeout waiting for DMA
    ide_dmaproc: chipset supported ide_dma_timeout func only: 14
    hda: status error: status=0x58 { DriveReady SeekComplete DataRequest }
    hda: drive not ready for command

    (Result from "cat /proc/ide/sis")
    --------------- Primary Channel ---------------- Secondary Channel -------------
    Channel Status: On On
    Operation Mode: Compatible Compatible
    Cable Type: 80 pins 80 pins
    Prefetch Count: 512 512
    Drive 0: Postwrite Enabled Postwrite Disabled
    Prefetch Enabled Prefetch Disabled
    UDMA Enabled UDMA Enabled
    UDMA Cycle Time 2 CLK UDMA Cycle Time 2 CLK
    Data Active Time 2 PCICLK Data Active Time 5 PCICLK
    Data Recovery Time 1 PCICLK Data Recovery Time 1 PCICLK
    Drive 1: Postwrite Enabled Postwrite Disabled
    Prefetch Enabled Prefetch Disabled
    UDMA Enabled UDMA Enabled
    UDMA Cycle Time 2 CLK UDMA Cycle Time 2 CLK
    Data Active Time 2 PCICLK Data Active Time 2 PCICLK
    Data Recovery Time 1 PCICLK Data Recovery Time 1 PCICLK

    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:02    [W:0.025 / U:4.860 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site