Messages in this thread | | | Date | Mon, 27 Aug 2001 16:28:10 -0700 | From | Tim Moore <> | Subject | Re: HPT370 driver problems continued... |
| |
> I wonder whether this could be a compatiblity issue between drive and > controller - both Edward and myself are using similar IBM Deskstar models - > anyone else had problems with these drives?
> > 30Gb IBM DTLA 307030
This drive is mentioned in hpt366.c. You might want to check ~/drivers/block/hpt370.c.
const char *bad_ata66_4[] = { "IBM-DTLA-307075", "IBM-DTLA-307045", "IBM-DTLA-307030", "WDC AC310200R", NULL };
> > The initial hardware configuration > > had two 40G IBM drives (7200RPM > > UDMA100) each attached as the IDE > > Master (using cable select) of the > > primary and secondary IDE interfaces
I don't think cable select is commonly used. All the IDE RAID setups I've done use a single disk/controller channel, all IDE Masters.
rgds, tim.
-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |