lkml.org 
[lkml]   [2001]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectPoor Performance for ethernet bonding
    Hi


    I have tried to use ethernet network interfaces bonding to increase
    peformance.

    Bonding is working fine, but the performance is rather poor.
    FTP between 2 machines ( kernel 2.4.4 and 4 port DLink 100Mbit ethernet
    card)
    results in a transfer rate of 3MB/s).

    Any Hints?


    here is my setup for the channel bonding

    insmod bonding
    insmod tulip
    ifconfig bond0 192.168.100.2 netmask 255.255.255.0 broadcast
    192.168.100.255
    ifconfig bond0 down
    ./ifenslave -v bond0 eth2 eth3 eth4 eth5
    ifconfig bond0 up
    route add -host 192.168.100.1 dev bond0


    Many thanks for every help

    Bernhard

    --
    Dr. Bernhard Busch
    Max-Planck-Institut für Biochemie
    Am Klopferspitz 18a
    D-82152 Martinsried
    Tel: +48(89)8578-2582
    Fax: +49(89)8578-2479
    Email bbusch@biochem.mpg.de



    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:17    [W:0.030 / U:6.340 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site