lkml.org 
[lkml]   [2001]   [Aug]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectProblems with 2.2.19 but not with 2.2.18 (was: Re: [OOPS] Oopsen with 2.2.19)
Linux version 2.2.19-1 (root@serv01) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #1 Fri Jul 20 17:13:20 BRT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 03cf0000 @ 00100000 (usable)
Detected 427753 kHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 851.96 BogoMIPS
Memory: 61312k/63424k available (840k kernel code, 416k reserved, 820k data, 36k init)
Dentry hash table entries: 8192 (order 4, 64k)
Buffer cache hash table entries: 65536 (order 6, 256k)
Page cache hash table entries: 16384 (order 4, 64k)
CPU: L1 I Cache: 32K L1 D Cache: 32K
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfdb81
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
(scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 0/10/0
(scsi0) Wide Channel, SCSI ID=0, 16/255 SCBs
(scsi0) Downloading sequencer code... 436 instructions downloaded
scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.1.33/3.2.4
<Adaptec AHA-294X Ultra SCSI host adapter>
scsi : 1 host.
Vendor: FUJITSU Model: MAB3091SP Rev: 0106
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 1, lun 0
(scsi0:0:1:2) Synchronous at 40.0 Mbyte/sec, offset 8.
scsi : detected 1 SCSI disk total.
SCSI device sda: hdwr sector= 512 bytes. Sectors= 17824700 [8703 MB] [8.7 GB]
Partition check:
sda: sda1 sda2 sda3
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 36k freed
Adding Swap: 128484k swap-space (priority -1)
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 2;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 9d 6c 56 00 00 02 00
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS03 at 0x02e8 (irq = 3) is a 16550A
ne2k-pci.c: v1.02 for Linux 2.2, 10/19/2000, D. Becker/P. Gortmaker, http://www.scyld.com/network/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'Winbond 89C940' at I/O 0xdc00, IRQ 11.
eth0: Winbond 89C940 found at 0xdc00, IRQ 11, 00:40:95:02:7D:62.
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 1;
Have seen Data Phase. Length=2048, NumSGs=1.
Raw SCSI Command: 0x28 00 00 9b 3c 2e 00 00 04 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 1;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 b4 2c 5a 00 00 02 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 1;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 59 6c 68 00 00 02 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 2;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 65 f0 a2 00 00 02 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 2;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 01 0a 6c 60 00 00 02 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 2;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 a1 ac 5c 00 00 02 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 1;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 6d ac 5c 00 00 02 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 1;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 97 2c 5a 00 00 02 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 2;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 97 ae 98 00 00 02 00
(scsi0:0:1:0) Data overrun detected in Data-In phase, tag 2;
Have seen Data Phase. Length=1024, NumSGs=1.
Raw SCSI Command: 0x28 00 00 96 2e da 00 00 02 00
\
 
 \ /
  Last update: 2005-03-22 12:57    [W:0.054 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site