lkml.org 
[lkml]   [2001]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    More on "mt setblk" prob. under 2.4.5 with ide_scsi emulated HP 8Gig ide 
    drive (the orginal prob. was reported for 2.2.18).
    The "mt version" is:
    mt-st v. 0.4

    The output under 2.4.5 is:
    localhost.localdomain:/root# mt -f /dev/st0 setblk 32768
    st0: Block limits 2048 - 852220 bytes.
    st0: Error with sense data: [valid=0] Info fld=0x0, Current st09:00: sns = 70
    5ASC=26 ASCQ= 0
    Raw sense data:0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00 0x00
    0x26
    0x00 0x00 0x00 0x00 0x00 0x01 0x09 0x00 0x00 0x00 0x00
    /dev/st0: Input/output error

    This appears to be a problem with the scsi-ide emulation stuff not being able
    to cope with this ide drive.

    Now, the (ONLY) reason I am using scsi emulation with this IDE drive is
    (athough it works find under 2.2.18 kerenel with respect to both reads anmd
    writes as a IDE dev if scsi emul. is not in config) but under "2.4.x"
    kernels, scsi emulation MUST be turned on and used to get the drive to "read"
    - it writes Ok in either event.

    Floyd,
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 12:56    [W:0.031 / U:29.532 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site