Messages in this thread | | | Date | Mon, 16 Jul 2001 19:33:01 +0200 | Subject | PROBLEM:blinking screen in XFree4.x ! | From | Marko Rebrina <> |
| |
Hi, I have problem with XFree4.x(current 4.1) when I have large file transfer(~1GB) then screen in X start blinking(black screen),console works fine! Restarting Xe not resolving problem! No message in log !
I have K7-700Mhz/AbitKA7(KX133)/256M/G400DH32M Kernel:2.4.x,current 2.4.6
%cat /proc/modules nls_iso8859-1 2880 0 (autoclean) nls_iso8859-2 3392 1 (autoclean) nls_cp437 4384 1 (autoclean) vmnet 18752 0 (unused) vmmon 19152 0 (unused) 8139too 11936 1 hisax 134224 5 isdn 119984 6 [hisax] slhc 5024 2 [isdn] cmpci 23664 2
%cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(set) 0778-077a : parport0 0cf8-0cff : PCI conf1 4000-40ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] 5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] 6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] d000-d00f : VIA Technologies, Inc. Bus Master IDE d000-d007 : ide0 d008-d00f : ide1 d400-d41f : VIA Technologies, Inc. UHCI USB d400-d41f : usb-uhci d800-d81f : VIA Technologies, Inc. UHCI USB (#2) d800-d81f : usb-uhci dc00-dcff : Realtek Semiconductor Co., Ltd. RTL-8139 dc00-dcff : 8139too e000-e007 : PCI device 1043:0675 (Asustek Computer, Inc.) e400-e4ff : C-Media Electronics Inc CM8738 e400-e4ff : cmpci
%cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-0ffeffff : System RAM 00100000-0023e7d3 : Kernel code 0023e7d4-002b055f : Kernel data 0fff0000-0fff2fff : ACPI Non-volatile Storage 0fff3000-0fffffff : ACPI Tables d0000000-d7ffffff : VIA Technologies, Inc. VT8371 [KX133] d8000000-dbffffff : PCI Bus #01 d8000000-d8003fff : Matrox Graphics, Inc. MGA G400 AGP d9000000-d97fffff : Matrox Graphics, Inc. MGA G400 AGP dc000000-ddffffff : PCI Bus #01 dc000000-ddffffff : Matrox Graphics, Inc. MGA G400 AGP de000000-de0000ff : Realtek Semiconductor Co., Ltd. RTL-8139 de000000-de0000ff : 8139too de001000-de0010ff : PCI device 1043:0675 (Asustek Computer, Inc.) ffff0000-ffffffff : reserved
%lspci -vvv 00:00.0 Host bridge: VIA Technologies, Inc. VT8371 [KX133] (rev 02) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: VIA Technologies, Inc. VT8371 [KX133 AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: d8000000-dbffffff Prefetchable memory behind bridge: dc000000-ddffffff BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 21) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 3 Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:08.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ Latency: 32 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at dc00 [size=256] Region 1: Memory at de000000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
00:0b.0 Network controller: Asustek Computer, Inc.: Unknown device 0675 (rev 02) Subsystem: Dynalink: Unknown device 1704 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (4000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e000 [disabled] [size=8] Region 1: Memory at de001000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:0f.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10) Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (500ns min, 6000ns max) Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at e400 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 05) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G400 MAX/Dual Head 32Mb Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (4000ns min, 8000ns max), cache line size 08 Interrupt: pin A routed to IRQ 10 Region 0: Memory at dc000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at d8000000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [f0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1
-- -o) // Marko Rebrina, http://jagor.srce.hr/~mrebrina, ICQ:20358351 \\ /\\ _\_v Serving FREE beer to the users of the FREE Linux of a FREE world - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |