Messages in this thread |  | | | From | "james bond" <> | | Subject | BIG PROBLEM | | Date | Thu, 28 Jun 2001 18:49:46 -0000 |
| |
1-systeme hangs when i try ton compile anything
i've compiled the kernel 2.4.4 , once i finish and boot the first time on 2.4.4 everything goses ok , only too problemes 1st- klogd takes 100% CPU time 2nd- cat /proc/cpuinf --guives me too CPU'S without putin any info about the CPU 1 like that approximatively
-------------------------------------------- processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 498.672 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 992.87
processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : stepping : 3 cpu MHz : cache size : fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 3 wp : yes flags : bogomips : --------------------------------------------
at the second boot it detects correctly CPU0 and CPU1
cat /proc/cpuinfo --> ------------------------------------------- processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 498.672 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 992.87 processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 7 model name : Pentium III (Katmai) stepping : 3 cpu MHz : 498.672 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 3 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr sse bogomips : 996.14 ---------------------------------------- cat /proc/version --> ---------------------------------------- Linux version 2.4.4 (root@seraka) (gcc version 2.95.3 20010315 (release)) #2 SMP Thu Jun 28 07:04:06 CEST 2001 ---------------------------------------- cat /proc/modules --> nothing cause im no using modules ---------------------------------------- cat /proc/ioports -------------------------------0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 02f8-02ff : serial(auto) 03c0-03df : vga+ 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 4000-403f : Intel Corporation 82371AB PIIX4 ACPI 5000-501f : Intel Corporation 82371AB PIIX4 ACPI d000-dfff : PCI Bus #01 e000-e01f : Intel Corporation 82371AB PIIX4 USB e400-e4ff : Adaptec 7892A00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cc000-000d25ff : Extension ROM 000d3000-000d87ff : Extension ROM 000f0000-000fffff : System ROM 00100000-0ffeffff : System RAM 00100000-00245892 : Kernel code 00245893-002ca41f : Kernel data 0fff0000-0fff2fff : ACPI Non-volatile Storage 0fff3000-0fffffff : ACPI Tables d8000000-dbffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge dc000000-dfffffff : PCI Bus #01 dc000000-dc003fff : Matrox Graphics, Inc. MGA G400 AGP dd000000-dd7fffff : Matrox Graphics, Inc. MGA G400 AGP e0000000-e1ffffff : PCI Bus #01 e0000000-e1ffffff : Matrox Graphics, Inc. MGA G400 AGP e5000000-e5007fff : Yamaha Corporation YMF-724 e5008000-e5008fff : Adaptec AHA-2940U2/W e5008000-e5008fff : aic7xxx e5009000-e5009fff : Adaptec 7892A e5009000-e5009fff : aic7xxx fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved ------------------------------------------------ e800-e8ff : Adaptec AHA-2940U2/W ec00-ec1f : 3Com Corporation 3c595 100BaseTX [Vortex] ec00-ec1f : eth0 f000-f00f : Intel Corporation 82371AB PIIX4 IDE ----------------------- cat /proc/iomem --->00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000cc000-000d25ff : Extension ROM 000d3000-000d87ff : Extension ROM 000f0000-000fffff : System ROM 00100000-0ffeffff : System RAM 00100000-00245892 : Kernel code 00245893-002ca41f : Kernel data 0fff0000-0fff2fff : ACPI Non-volatile Storage 0fff3000-0fffffff : ACPI Tables d8000000-dbffffff : Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge dc000000-dfffffff : PCI Bus #01 dc000000-dc003fff : Matrox Graphics, Inc. MGA G400 AGP dd000000-dd7fffff : Matrox Graphics, Inc. MGA G400 AGP e0000000-e1ffffff : PCI Bus #01 e0000000-e1ffffff : Matrox Graphics, Inc. MGA G400 AGP e5000000-e5007fff : Yamaha Corporation YMF-724 e5008000-e5008fff : Adaptec AHA-2940U2/W e5008000-e5008fff : aic7xxx e5009000-e5009fff : Adaptec 7892A e5009000-e5009fff : aic7xxx fec00000-fec00fff : reserved fee00000-fee00fff : reserved ffff0000-ffffffff : reserved ---------------------------------------------- lspci -vvv --->
Expansion ROM at e2000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:09.0 SCSI storage controller: Adaptec AHA-2940U2/W Subsystem: Adaptec: Unknown device a180 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (9750ns min, 6250ns max), cache line size 08 Interrupt: pin A routed to IRQ 17 BIST result: 00 Region 0: I/O ports at e800 [disabled] [size=256] Region 1: Memory at e5008000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at e3000000 [disabled] [size=128K] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0a.0 Ethernet controller: 3Com Corporation 3c595 100BaseTX [Vortex] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (750ns min, 2000ns max) Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at ec00 [size=32] Expansion ROM at e4000000 [disabled] [size=64K] 00:0c.0 Multimedia audio controller: Yamaha Corporation YMF-724 (rev 05) Subsystem: Yamaha Corporation YMF724-Based PCI Audio Adapter Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1250ns min, 6250ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at e5000000 (32-bit, non-prefetchable) [size=32K] Capabilities: [50] Power Management version 1 Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc.: Unknown device 0641 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 8000ns max), cache line size 08 Interrupt: pin A routed to IRQ 0 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at dc000000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at dd000000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [f0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=x1 ----------------------------------------------------- cat /proc/scsi/scsi --> ----------------------------------------------------- Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM Model: DDYS-T18350M Rev: S93D Type: Direct-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: COMPAQ Model: HB00931B93 Rev: A195 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 02 Lun: 00 Vendor: PLEXTOR Model: CD-ROM PX-32TS Rev: 1.03 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 03 Lun: 00 Vendor: PLEXTOR Model: CD-R PX-R820T Rev: 1.06 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 04 Lun: 00 Vendor: COMPAQ Model: HB00931B93 Rev: A195 Type: Direct-Access ANSI SCSI revision: 02 ---------------------------------------------------- my motherboard is an Gigabyte GA-6BXD with f3 bios and my memory is 256 ECC , so perhaps the defucnt is caused by the second CPU "CPU1" cause i hade somme probles with is ,
thank's for helping me caus i start to disespaire "sorry for my poor english" and i don't wana use Miscosoft
with regards
--------------------------------------------------- please answer me @ battata.chafik@noos.fr thanks _________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |