Messages in this thread | | | Date | Thu, 14 Jun 2001 14:07:28 +0200 | From | Marco <> | Subject | PROBLEM: hda timeout (busy) |
| |
Hello, here is my problem :
[1.] 2.4.x kernels sends hda: status timeout: status=0xd0 { Busy } errors
[2.] I have tried some 2.4.x kernels (2.4.0, 2.4.4, and now 2.4.5, from debs). They all produce the same error message : Jun 14 13:32:19 debian kernel: hda: status timeout: status=0xd0 { Busy } Jun 14 13:32:19 debian kernel: ide0: reset: success It happens often but irregularly. It does not occur with 2.2 kernels.
[3.] ide, hard drive
[4.] cat /proc/version Linux version 2.4.5 (root@debian) (gcc version 2.95.4 20010522 (Debian prerelease)) #1 mar jun 12 17:24:48 CEST 2001
[7.] Environment [7.1.] Linux debian 2.4.5 #1 mar jun 12 17:24:48 CEST 2001 i686 unknown Gnu C 2.95.4 Gnu make 3.79.1 binutils 2.11.90.0.7 util-linux 2.11d mount 2.11d modutils 2.4.6 e2fsprogs 1.21-WIP PPP 2.4.1 Linux C Library 2.2.3 Dynamic linker (ldd) 2.2.3 Procps 2.0.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded ppp_deflate ppp_async ppp_generic slhc vfat fat NVdriver tuner tvaudio bttv videodev i2c-algo-bit lirc_i2c i2c-core lirc_dev sb sb_lib uart401 sound ide-scsi apm
[7.2.] [marco] /usr/src/linux $ cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 6 model name : Celeron (Mendocino) stepping : 5 cpu MHz : 499.792 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 996.14
[7.3.] [marco] /usr/src/linux $ cat /proc/modules ppp_deflate 39136 0 (autoclean) ppp_async 6224 0 (autoclean) ppp_generic 13216 0 (autoclean) [ppp_deflate ppp_async] slhc 4704 0 (autoclean) [ppp_generic] vfat 8752 2 (autoclean) fat 30624 0 (autoclean) [vfat] NVdriver 658720 15 tuner 4112 1 (autoclean) tvaudio 8064 0 (autoclean) (unused) bttv 53456 1 (autoclean) videodev 4736 2 (autoclean) [bttv] i2c-algo-bit 7200 1 (autoclean) [bttv] lirc_i2c 2512 0 i2c-core 12880 0 [tuner tvaudio bttv i2c-algo-bit lirc_i2c] lirc_dev 7808 1 [lirc_i2c] sb 7344 2 sb_lib 33120 0 [sb] uart401 6288 0 [sb_lib] sound 55392 2 [sb_lib uart401] ide-scsi 7664 0 apm 8544 0
[7.4.] [marco] /usr/src/linux $ cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0213-0213 : isapnp read 0220-022f : soundblaster 02f8-02ff : serial(set) 0330-0333 : MPU-401 UART 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(set) 0a79-0a79 : isapnp write 0cf8-0cff : PCI conf1 4000-403f : Intel Corporation 82371AB PIIX4 ACPI 5000-501f : Intel Corporation 82371AB PIIX4 ACPI d000-dfff : PCI Bus #01 e000-e01f : Intel Corporation 82371AB PIIX4 USB e000-e01f : usb-uhci e400-e41f : Realtek Semiconductor Co., Ltd. RTL-8029(AS) f000-f00f : Intel Corporation 82371AB PIIX4 IDE
[7.5.] debian:/home/marco# lspci -vvv 00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 64 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: e4000000-e5ffffff Prefetchable memory behind bridge: e6000000-e7ffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Interrupt: pin D routed to IRQ 9 Region 4: I/O ports at e000 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9
00:09.0 Multimedia video controller: Brooktree Corporation Bt878 (rev 11) Subsystem: Hauppauge computer works Inc. WinTV/GO Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 10000ns max) Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8000000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.1 Multimedia controller: Brooktree Corporation Bt878 (rev 11) Subsystem: Hauppauge computer works Inc. WinTV/GO Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (1000ns min, 63750ns max) Interrupt: pin A routed to IRQ 9 Region 0: Memory at e8001000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Subsystem: Realtek Semiconductor Co., Ltd. RT8029(AS) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at e400 [size=32]
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 11) (prog-if 00 [VGA]) Subsystem: Creative Labs CT6892 RIVA TNT2 Value Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at e6000000 (32-bit, prefetchable) [size=32M] Expansion ROM at e5000000 [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[7.7.] debian:/home/marco# hdparm -i /dev/hda
/dev/hda:
Model=ST36421A, FwRev=8.01, SerialNo=6BE08WVK Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=13330/15/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=256kB, MaxMultSect=16, MultSect=off CurCHS=13330/15/63, CurSects=12596850, LBA=yes, LBAsects=12596850 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 udma0 udma1 *udma2 udma3 udma4
[X.] the use of the ide0=autotune option produces a freeze at xdm login. The use of the hda=slow option does not suppress the error message.
Thanks for your help
Marco
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |