lkml.org 
[lkml]   [2001]   [May]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[2.4.4ac4] Kernel crash while unmounting CD
    Date
    [1.] One line summary of the problem:

    Kernel panic when trying to unmount a ide-scsi cdrom.

    [2.] Full description of the problem/report:

    With Kernel 2.4.4 ac4 I got a kernelpanic while trying to unmount an
    ide-scsi-device.

    What I did:
    1. Burning the cdrom (647 MB raw data; medium 700 MB) with cdrecord 1.10,
    compiled on this system with this kernel.
    2. Burning ended successfully with no errors and no warnings.
    3. After burning, the cd was ejected automatically.
    4. Closing the tray with the new burned CD and mounting the CD.
    5. the mounting takes a lot of time, but finally, the CD has been mounted. A
    ls -l on the root of the CD takes a lot of time again. But finally, the
    output of ls -l appeared.
    6. umount of the CD. This took a lot of time until the Kernel crashed:

    <0> Kernel panic. Attempt to kill the idle task. In idle task not syncing.
    <1> unable to handle NULL pointer dereference at virtual address ... [I
    hoped, the oops had been logged in messages - nope; is there any way to save
    the output of this kernel oops?]


    Before the oops, you can read the following in /var/log/messages:
    May 9 17:24:47 athlon kernel: SCSI subsystem driver Revision: 1.00
    May 9 17:24:47 athlon kernel: scsi0 : SCSI host adapter emulation for IDE
    ATAPI devices
    May 9 17:24:47 athlon kernel: Vendor: Model: ATAPI CDROM.48X
    Rev: 120Y
    May 9 17:24:47 athlon kernel: Type: CD-ROM
    ANSI SCSI revision: 02
    May 9 17:24:47 athlon kernel: Vendor: PHILIPS Model: CDD3610 CD-R/RW
    Rev: 3.01
    May 9 17:24:47 athlon kernel: Type: CD-ROM
    ANSI SCSI revision: 02
    [...]
    May 9 18:09:33 athlon kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    May 9 18:09:33 athlon kernel: ISO 9660 Extensions: RRIP_1991A
    May 9 18:10:07 athlon kernel: scsi : aborting command due to timeout : pid
    0, scsi0, channel 0, id 1, lun 0 Read (10) 00 00 00 00 26 00 00 01 00
    May 9 18:10:07 athlon kernel: hdd: timeout waiting for DMA
    May 9 18:10:07 athlon kernel: ide_dmaproc: chipset supported ide_dma_timeout
    func only: 14
    May 9 18:10:07 athlon kernel: hdd: irq timeout: status=0xd0 { Busy }
    May 9 18:10:07 athlon kernel: hdd: DMA disabled
    May 9 18:10:09 athlon kernel: hdd: ATAPI reset complete
    May 9 18:10:09 athlon kernel: hdd: irq timeout: status=0xd0 { Busy }
    May 9 18:10:12 athlon kernel: hdd: ATAPI reset complete
    May 9 18:10:12 athlon kernel: hdd: irq timeout: status=0xd0 { Busy }
    May 9 18:10:12 athlon kernel: scsi0 channel 0 : resetting for second half of
    retries.
    May 9 18:10:12 athlon kernel: SCSI bus is being reset for host 0 channel 0.
    May 9 18:10:12 athlon kernel: hdd: status timeout: status=0xd0 { Busy }
    May 9 18:10:12 athlon kernel: hdd: drive not ready for command
    May 9 18:10:20 athlon kernel: hdd: ATAPI reset complete
    May 9 18:10:20 athlon kernel: SCSI cdrom error : host 0 channel 0 id 1 lun 0
    return code = 27000002
    May 9 18:10:20 athlon kernel: I/O error: dev 0b:01, sector 152
    May 9 18:10:21 athlon kernel: scsi0 : channel 0 target 1 lun 0 request sense
    failed, performing reset.
    May 9 18:10:21 athlon kernel: SCSI bus is being reset for host 0 channel 0.
    May 9 18:10:21 athlon kernel: SCSI cdrom error : host 0 channel 0 id 1 lun 0
    return code = 18000002
    May 9 18:10:21 athlon kernel: sd0b:01: old sense key None
    May 9 18:10:21 athlon kernel: Non-extended sense class 0 code 0x0
    May 9 18:10:21 athlon kernel: I/O error: dev 0b:01, sector 152
    May 9 18:10:41 athlon kernel: scsi0 : channel 0 target 1 lun 0 request sense
    failed, performing reset.
    May 9 18:10:41 athlon kernel: SCSI bus is being reset for host 0 channel 0.
    May 9 18:10:41 athlon kernel: SCSI cdrom error : host 0 channel 0 id 1 lun 0
    return code = 18000002
    May 9 18:10:41 athlon kernel: sd0b:01: old sense key None
    May 9 18:10:41 athlon kernel: Non-extended sense class 0 code 0x0
    May 9 18:10:41 athlon kernel: I/O error: dev 0b:01, sector 152
    May 9 18:10:41 athlon kernel: scsi0 : channel 0 target 1 lun 0 request sense
    failed, performing reset.
    May 9 18:10:41 athlon kernel: SCSI bus is being reset for host 0 channel 0.
    May 9 18:10:41 athlon kernel: SCSI cdrom error : host 0 channel 0 id 1 lun 0
    return code = 18000002
    May 9 18:10:41 athlon kernel: sd0b:01: old sense key None
    May 9 18:10:41 athlon kernel: Non-extended sense class 0 code 0x0
    May 9 18:10:41 athlon kernel: I/O error: dev 0b:01, sector 152
    May 9 18:10:48 athlon kernel: scsi0 : channel 0 target 1 lun 0 request sense
    failed, performing reset.
    May 9 18:10:48 athlon kernel: SCSI bus is being reset for host 0 channel 0.
    May 9 18:10:50 athlon kernel: scsi0 : channel 0 target 1 lun 0 request sense
    failed, performing reset.



    7. Reboot. I couldn't mount any more this CD with my burning device Philips
    CDD 3610 (ATAPI-burner). The following log appears:

    May 9 18:18:02 athlon kernel: SCSI subsystem driver Revision: 1.00
    May 9 18:18:02 athlon kernel: scsi0 : SCSI host adapter emulation for IDE
    ATAPI devices
    May 9 18:18:02 athlon kernel: Vendor: Model: ATAPI CDROM.48X
    Rev: 120Y
    May 9 18:18:02 athlon kernel: Type: CD-ROM
    ANSI SCSI revision: 02
    May 9 18:18:02 athlon kernel: Vendor: PHILIPS Model: CDD3610 CD-R/RW
    Rev: 3.01
    May 9 18:18:02 athlon kernel: Type: CD-ROM
    ANSI SCSI revision: 02
    May 9 18:18:02 athlon kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0,
    id 0, lun 0
    May 9 18:18:02 athlon kernel: Attached scsi CD-ROM sr1 at scsi0, channel 0,
    id 1, lun 0
    May 9 18:18:02 athlon kernel: sr0: scsi3-mmc drive: 0x/0x cd/rw xa/form2
    cdda tray
    May 9 18:18:02 athlon kernel: Uniform CD-ROM driver Revision: 3.12
    May 9 18:18:02 athlon kernel: sr1: scsi3-mmc drive: 2x/6x writer cd/rw
    xa/form2 cdda tray
    May 9 18:18:02 athlon kernel: VFS: Disk change detected on device sr(11,1)
    May 9 18:18:02 athlon kernel: attempt to access beyond end of device
    May 9 18:18:02 athlon kernel: 0b:01: rw=0, want=1657690660, limit=2
    May 9 18:18:02 athlon kernel: isofs_read_super: bread failed, dev=0b:01,
    iso_blknum=1902587153, block=1902587153
    May 9 18:18:24 athlon kernel: sr1: CDROM (ioctl) error, command: Test Unit
    Ready 00 00 00 00 00
    May 9 18:18:24 athlon kernel: Info fld=0x0, Current sr00:00: sense key
    Medium Error
    May 9 18:18:24 athlon kernel: Additional sense indicates Unable to recover
    table-of-contents
    May 9 18:18:37 athlon kernel: sr1: CDROM (ioctl) error, command: Start/Stop
    Unit 00 00 00 03 00
    May 9 18:18:37 athlon kernel: Info fld=0x0, Current sr00:00: sense key
    Medium Error
    May 9 18:18:37 athlon kernel: Additional sense indicates Unable to recover
    table-of-contents
    May 9 18:18:37 athlon kernel: cdrom: open failed.
    May 9 18:20:43 athlon kernel: VFS: Disk change detected on device sr(11,0)
    May 9 18:20:43 athlon kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    May 9 18:20:43 athlon kernel: ISO 9660 Extensions: RRIP_1991A
    May 9 18:22:14 athlon kernel: sr1: CDROM (ioctl) error, command: Test Unit
    Ready 00 00 00 00 00
    May 9 18:22:14 athlon kernel: Info fld=0x0, Current sr00:00: sense key
    Medium Error
    May 9 18:22:14 athlon kernel: Additional sense indicates Unable to recover
    table-of-contents
    May 9 18:22:27 athlon kernel: sr1: CDROM (ioctl) error, command: Start/Stop
    Unit 00 00 00 03 00
    May 9 18:22:27 athlon kernel: Info fld=0x0, Current sr00:00: sense key
    Medium Error
    May 9 18:22:27 athlon kernel: Additional sense indicates Unable to recover
    table-of-contents
    May 9 18:22:27 athlon kernel: cdrom: open failed.


    8. Mounting of this CD with my cdrom-device is no problem and works very fast.
    9. I burned another CD (627 MB Data on 700 MB CD-R). The burning was
    errrorfree, mounting with CD-device with no problems, but cdrecorder tells in
    /var/log/messages:

    May 9 19:13:08 athlon kernel: sr1: CDROM (ioctl) error, command: Test Unit
    Ready 00 00 00 00 00
    May 9 19:13:08 athlon kernel: Info fld=0x0, Current sr00:00: sense key
    Medium Error
    May 9 19:13:08 athlon kernel: Additional sense indicates Unable to recover
    table-of-contents
    May 9 19:13:14 athlon kernel: VFS: Disk change detected on device sr(11,1)
    May 9 19:13:15 athlon kernel: ISO 9660 Extensions: Microsoft Joliet Level 3
    May 9 19:13:15 athlon kernel: ISO 9660 Extensions: RRIP_1991A

    With this CD, I've no further problems while reading with the cdrecorder.


    [3.] Keywords (i.e., modules, networking, kernel):

    ide-scsi, kernel panic, mount

    [4.] Kernel version (from /proc/version):

    Linux version 2.4.4-ac4 (root@athlon) (gcc version 2.95.3 20010315 (release))
    #2 Sam Mai 5 01:38:39 CEST 2001

    [5.] Output of Oops.. message (if applicable) with symbolic information
    resolved (see Documentation/oops-tracing.txt)

    <0> Kernel panic. Attempt to kill the idle task. In idle task not syncing.
    <1> unable to handle NULL pointer dereference at virtual address ... [I
    hoped, the oops had been logged in messages - nope; is there any way to save
    the output of this kernel oops?]


    [6.] A small shell script or example program which triggers the
    problem (if possible)

    umount /cdrom

    [7.] Environment
    [7.1.] Software (add the output of the ver_linux script here)

    Linux athlon 2.4.4-ac4 #2 Sam Mai 5 01:38:39 CEST 2001 i686 unknown

    Gnu C 2.95.3
    Gnu make 3.76.1
    binutils 2.9.5.0.12
    util-linux 2.10s
    mount 2.10s
    modutils 2.4.5
    e2fsprogs 1.19
    PPP 2.4.0b1
    Linux C Library 2.1.3
    Dynamic linker (ldd) 2.1.3
    Procps 2.0.2
    Net-tools 1.56
    Kbd 0.96
    Sh-utils 2.0g
    Modules Loaded ide-scsi sr_mod scsi_mod cdrom isofs via82cxxx_audio
    ac97_codec r128 agpgart nfs lockd sunrpc 8139too sis900 parport_pc parport
    unix

    [7.2.] Processor information (from /proc/cpuinfo):

    processor : 0
    vendor_id : AuthenticAMD
    cpu family : 6
    model : 2
    model name : AMD Athlon(tm) Processor
    stepping : 1
    cpu MHz : 801.845
    cache size : 512 KB
    fdiv_bug : no
    hlt_bug : no
    f00f_bug : no
    coma_bug : no
    fpu : yes
    fpu_exception : yes
    cpuid level : 1
    wp : yes
    flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
    cmov pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow
    bogomips : 1599.07


    [7.3.] Module information (from /proc/modules):

    ide-scsi 7536 0 (autoclean)
    sr_mod 11232 0 (autoclean) (unused)
    scsi_mod 78432 2 (autoclean) [ide-scsi sr_mod]
    cdrom 27392 0 (autoclean) [sr_mod]
    isofs 17328 0 (autoclean)
    via82cxxx_audio 16736 0 (autoclean) (unused)
    ac97_codec 8496 0 (autoclean) [via82cxxx_audio]
    r128 84048 1 (autoclean)
    agpgart 12496 3
    nfs 43648 1 (autoclean)
    lockd 38224 1 (autoclean) [nfs]
    sunrpc 57216 1 (autoclean) [nfs lockd]
    8139too 10720 1 (autoclean)
    sis900 11008 1 (autoclean)
    parport_pc 18960 0 (autoclean)
    parport 26240 0 (autoclean) [parport_pc]
    unix 13984 126 (autoclean)

    [7.4.] Loaded driver and hardware information (/proc/ioports,
    /proc/iomem)

    0000-001f : dma1
    0020-003f : pic1
    0040-005f : timer
    0060-006f : keyboard
    0080-008f : dma page reg
    00a0-00bf : pic2
    00c0-00df : dma2
    00f0-00ff : fpu
    0170-0177 : ide1
    01f0-01f7 : ide0
    0376-0376 : ide1
    0378-037a : parport0
    037b-037f : parport0
    03c0-03df : vga+
    03f6-03f6 : ide0
    0cf8-0cff : PCI conf1
    4000-40ff : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
    5000-500f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
    6000-607f : VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
    c000-cfff : PCI Bus #01
    c000-c0ff : ATI Technologies Inc Rage 128 PF
    d000-d00f : VIA Technologies, Inc. Bus Master IDE
    d000-d007 : ide0
    d008-d00f : ide1
    d400-d41f : VIA Technologies, Inc. UHCI USB
    dc00-dcff : VIA Technologies, Inc. AC97 Audio Controller
    dc00-dcff : via82cxxx
    e000-e003 : VIA Technologies, Inc. AC97 Audio Controller
    e400-e403 : VIA Technologies, Inc. AC97 Audio Controller
    e800-e8ff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
    e800-e8ff : sis900
    ec00-ecff : Realtek Semiconductor Co., Ltd. RTL-8139
    ec00-ecff : 8139too


    00000000-0009fbff : System RAM
    0009fc00-0009ffff : reserved
    000a0000-000bffff : Video RAM area
    000c0000-000c7fff : Video ROM
    000f0000-000fffff : System ROM
    00100000-0ffeffff : System RAM
    00100000-001ca37b : Kernel code
    001ca37c-001ff1b7 : Kernel data
    0fff0000-0fff2fff : ACPI Non-volatile Storage
    0fff3000-0fffffff : ACPI Tables
    d0000000-d3ffffff : PCI Bus #01
    d0000000-d3ffffff : ATI Technologies Inc Rage 128 PF
    d4000000-d5ffffff : PCI Bus #01
    d5000000-d5003fff : ATI Technologies Inc Rage 128 PF
    d6000000-d7ffffff : VIA Technologies, Inc. VT8371 [KX133]
    d9000000-d9000fff : Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
    d9000000-d9000fff : sis900
    d9001000-d90010ff : Realtek Semiconductor Co., Ltd. RTL-8139
    d9001000-d90010ff : 8139too
    ffff0000-ffffffff : reserved

    [7.5.] PCI information ('lspci -vvv' as root)

    00:00.0 Host bridge: VIA Technologies, Inc. VT8371 [KX133] (rev 02)
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 0
    Region 0: Memory at d6000000 (32-bit, prefetchable) [size=32M]
    Capabilities: [a0] AGP version 2.0
    Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
    Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=<none>

    00:01.0 PCI bridge: VIA Technologies, Inc. VT8371 [PCI-PCI Bridge] (prog-if
    00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000c000-0000cfff
    Memory behind bridge: d4000000-d5ffffff
    Prefetchable memory behind bridge: d0000000-d3ffffff
    BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
    Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping+ SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0

    00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10)
    (prog-if 8a [Master SecP PriP])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32
    Region 4: I/O ports at d000 [size=16]
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
    (prog-if 00 [UHCI])
    Subsystem: Unknown device 0925:1234
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32, cache line size 08
    Interrupt: pin D routed to IRQ 9
    Region 4: I/O ports at d400 [size=32]
    Capabilities: [80] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
    30)
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin ? routed to IRQ 9
    Capabilities: [68] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 [Apollo
    Super AC97/Audio] (rev 20)
    Subsystem: VIA Technologies, Inc.: Unknown device 4511
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin C routed to IRQ 5
    Region 0: I/O ports at dc00 [size=256]
    Region 1: I/O ports at e000 [size=4]
    Region 2: I/O ports at e400 [size=4]
    Capabilities: [c0] Power Management version 2
    Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-

    00:08.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 10/100
    Ethernet (rev 02)
    Subsystem: Silicon Integrated Systems [SiS] SiS900 10/100 Ethernet
    Adapter
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (13000ns min, 2750ns max)
    Interrupt: pin A routed to IRQ 10
    Region 0: I/O ports at e800 [size=256]
    Region 1: Memory at d9000000 (32-bit, non-prefetchable) [size=4K]
    Expansion ROM at <unassigned> [disabled] [size=128K]
    Capabilities: [40] Power Management version 1
    Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
    PME(D0+,D1+,D2+,D3hot+,D3cold-)
    Status: D0 PME-Enable+ DSel=0 DScale=0 PME-

    00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
    Subsystem: Realtek Semiconductor Co., Ltd. RT8139
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping- SERR- FastB2B-
    Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (8000ns min, 16000ns max)
    Interrupt: pin A routed to IRQ 11
    Region 0: I/O ports at ec00 [size=256]
    Region 1: Memory at d9001000 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at <unassigned> [disabled] [size=64K]

    01:00.0 VGA compatible controller: ATI Technologies Inc Rage 128 PF (prog-if
    00 [VGA])
    Subsystem: ATI Technologies Inc: Unknown device 0008
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
    Stepping+ SERR- FastB2B-
    Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
    <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (2000ns min), cache line size 08
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
    Region 1: I/O ports at c000 [size=256]
    Region 2: Memory at d5000000 (32-bit, non-prefetchable) [size=16K]
    Expansion ROM at <unassigned> [disabled] [size=128K]
    Capabilities: [50] AGP version 2.0
    Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2
    Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=<none>
    Capabilities: [5c] Power Management version 2
    Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
    PME(D0-,D1-,D2-,D3hot-,D3cold-)
    Status: D0 PME-Enable- DSel=0 DScale=0 PME-



    [7.6.] SCSI information (from /proc/scsi/scsi)

    Attached devices:
    Host: scsi0 Channel: 00 Id: 00 Lun: 00
    Vendor: Model: ATAPI CDROM.48X Rev: 120Y
    Type: CD-ROM ANSI SCSI revision: 02
    Host: scsi0 Channel: 00 Id: 01 Lun: 00
    Vendor: PHILIPS Model: CDD3610 CD-R/RW Rev: 3.01
    Type: CD-ROM ANSI SCSI revision: 02

    [7.7.] Other information that might be relevant to the problem
    (please look in /proc and include all information that you
    think to be relevant):

    Please ask, if you want to know some more things!


    [X.] Other notes, patches, fixes, workarounds:

    dito.

    Regards,
    Andreas Hartmann
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 12:52    [W:0.052 / U:124.616 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site