[lkml]   [2001]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: UDMA(66) drive coming up as UDMA(33)?
    "David St.Clair" wrote:
    > I'm trying to get my hard drive to use UDMA/66. I'm thinking the cable
    > is not being detected. When the HPT366 bios is set to UDMA 4; using

    I think that should be UDMA 5 for 66? As far as I can remember UDMA4 is 33MHz with S.M.A.R.T. which
    add some reporting functionality. But I might be wrong...

    > hdparm -t, I get a transfer rate of 19.51 MB/s. When the HPT366 bios is
    > set to PIO 4 the transfer rate is the same. Is this normal for a UDMA/66
    > drive? What makes me think something is wrong is that the log says
    > "ide2: BM-DMA at 0xbc00-0xbc07, BIOS settings: hde:pio" <-- PIO?
    > and
    > "hde: 27067824 sectors (13859 MB) w/371KiB Cache, CHS=26853/16/63,
    > UDMA(33)" <--- UDMA(33)? shouldn't it be UDMA(66)?

    I got (kernel 2.2.18):

    HPT370: IDE controller on PCI bus 00 dev 98
    HPT370: chipset revision 3
    HPT370: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:pio

    hda and hdc are my hd's. My mainboard is a Abit KT7-RAID.

    > Any ideas what might be wrong? Possible bug?

    I would set the UDMA5 for the HDs in the HPT bios.

    good luck,
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:24    [W:0.020 / U:0.600 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site