Messages in this thread |  | | | Date | Sat, 07 Apr 2001 20:36:05 +0200 | | From | Michael Reinelt <> | | Subject | Re: Multi-function PCI devices |
| |
Gérard Roudier wrote: > > > Tim Waugh wrote: > > > > Adding PCI entries to both serial.c and parport_pc.c was that easy.... > > > > > > And that's how it should be, IMHO. There needs to be provision for > > > more than one driver to be able to talk to any given PCI device. > > > > True, true, true. > > Could you start up your brain now :) There's no need to start it. My brain is either 'always on', or 'suspended to ram' :-)
> and think about the actual issue. All > the drivers must share the device resources and there is no (simple) way > to do so generically. > What you want to do is to write a single software driver, optionnaly > broken into several modules, that is aware of all the functionnalities of > the board and that will register to all involved sub-systems as needed.
I agree. that would be the clean solution. Jeff Grazik provided some sample code, I'll try to write a driver according to this. If I find the time.... But what I want to know before I spend time (and not-earning-money :-) into this, I want to know: Is this the right way (TM)? How do other multiport cards deal with this issue?
This is a specific question to the serial and parallel maintainers: are there cards supported by _both_ the serial and parallel subsystem? Do they work with 2.4.3? Will they work in the future? (I'm too lazy to compare the PCI tables from serial and parallel ;-)
Another (design) question: How will such a driver/module deal with autodetection and/or devfs? I don't like to specify 'alias /dev/tts/4 netmos', because thats pure junk to me. What about pci hotplugging?
(keep in mind that I'm new to kernel development)
> What about the option of using a different hardware ? :-)
Har har har. Could you please tell me where to get one? I don't know how it's in your country, but here in austria you can call yourself a lucky guy if you even find a PCI serial/parallel card. If you find one, you'll find _one_. It's packaged in a little box where it reads "PCI 2S/1P board". The 'manual' is a bit larger than a stamp.
I could buy one after another, and try if they have a well-designed PCI interface.
I don't have the time for this.
I agree with you that this kind of hardware is junk. But there's a lack of alternatives.... If there's a reasonable number of 'good' hardware out there, I'll forget about Netmos and buy me a new card. If not, I'm willing to provide a driver.
bye, Michael
-- netWorks Vox: +43 316 692396 Michael Reinelt Fax: +43 316 692343 Geisslergasse 4 GSM: +43 676 3079941 A-8045 Graz, Austria e-mail: reinelt@eunet.at - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
|  |