Messages in this thread | | | Date | Tue, 24 Apr 2001 13:53:22 +0200 | From | Markus Schaber <> | Subject | Re: AHA-154X/1535 not recognized any more [Repost] |
| |
As my original message seems to have disappeared, here a Repost:
-------- Original Message -------- Subject: Re: AHA-154X/1535 not recognized any more Date: Fri, 20 Apr 2001 14:28:14 +0200 (MEST) From: Markus Schaber <markus.schaber@student.uni-ulm.de> To: "Rafael E. Herrera" <raffo@neuronet.pitt.edu> CC: Markus Schaber <markus.schaber@student.uni-ulm.de>,Alan Cox <alan@lxorguk.ukuu.org.uk>,Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
On Wed, 18 Apr 2001, Rafael E. Herrera wrote:
> > lunix:~# isapnp pnpconfig.txt > > Board 1 has Identity 08 0f 6d b9 45 42 15 90 04: ADP1542 Serial No 258849093 [checksum 08] > > pnptext:60 -- Fatal - IO range check attempted while device activated > > pnptext:60 -- Fatal - Error occurred executing request '<IORESCHECK> ' --- further action aborted > > I've a pnp sound card that fails to configure with a similar error > message when a (CHECK) entry was found in an (IO ...) block. Removing > those entries solved the problem. Try this in your pnpconfig.txt: > > (IO 0 (SIZE 4) (BASE 0x0330))
In this case, isapnp configures the card.
Using a modularized kernel, modprobe also loads the driver without any further parameters:
lunix:/home/schabi/public_html/scsi# /rescue/sbin/isapnp pnpconfig_nocheck.txt Board 1 has Identity 08 0f 6d b9 45 42 15 90 04: ADP1542 Serial No 258849093 [checksum 08] ADP1542/258849093[0]{SCSI Host Adapter }: Port 0x330; IRQ10 DMA0 --- Enabled OK lunix:/home/schabi/public_html/scsi# modprobe aha1542 lunix:/home/schabi/public_html/scsi# ls /proc/scsi advansys aha1542 ide-scsi scsi sg lunix:/home/schabi/public_html/scsi# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 03 Lun: 00 Vendor: YAMAHA Model: CRW8424S Rev: 1.0j Type: CD-ROM ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: IOMEGA Model: ZIP 100 Rev: 03.H Type: Direct-Access ANSI SCSI revision: ffffffff Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SAMSUNG Model: CD-ROM SCR-3231 Rev: S104 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 06 Lun: 00 Vendor: IOMEGA Model: ZIP 100 PLUS Rev: J.66 Type: Direct-Access ANSI SCSI revision: 02
So the isapnp tools can configure the card correctly.
markus - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |