[lkml]   [2001]   [Apr]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: [PATCH] adding PCI bus information to SCSI layer
    At 3:59 PM -0600 4/24/01, Richard Gooch wrote:
    >The plan I have (which I hope to get started on soon, now that I'm
    >back from travels), is to change /dev/scsi/host# from a directory into
    >a symbolic link to a directory called: /dev/bus/pci0/slot1/function0.
    >Thus, to access a partition via location, one would use the path:

    A minor PCI terminology point: PCI buses are subdivided into devices, not (necessarily) slots. So, for example, a multiple-device PCI card (say, two SCSI controllers) might have a PCI bridge creating a new bus, and two devices (not slots) on that bus. (It could alternatively be implemented as a single device with two functions, given a dual-interface chip, but not necessarily.)

    So a better name would be /dev/bus/pci0/dev1/fcn0/bus0/tgt1/lun2/part3 (taking the liberty of abbreviating some of the other names).

    How, if at all, would RAID devices, using more than one physical device, or SCSI bus, or PCI card, fit into this naming scheme?

    /Jonathan Lundell.
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:28    [W:0.019 / U:30.688 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site