Messages in this thread | | | Date | Mon, 16 Apr 2001 15:17:11 +0200 | From | Kurt Roeckx <> | Subject | Re: Athlon problem report summary |
| |
On Mon, Apr 16, 2001 at 01:30:14PM +0100, Alan Cox wrote: > > 2. 'My athlon box is fine until I am swapping' {and using DMA} > > Compiler independant, CPU version independant. All victims have a VIA chipset. > This one may be linked to the reported problems with VIA PCI. Two of the > reporters found disabling IDE DMA fixed this one
That's intresting. I had no problem at all.
hda and hdc are using udma33 here. hdb contains the swap, and gets this error on boot:
hdb: Conner Peripherals 340MB - CP30344, ATA DISK drive hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error } hdb: set_drive_speed_status: error=0x04 { DriveStatusError } ide0: Drive 1 didn't accept speed setting. Oh, well. [...] [same error message] hdb: 670320 sectors (343 MB) w/64KiB Cache, CHS=665/16/63, DMA
hdparm -iv /dev/hdb output:
/dev/hdb: multcount = 0 (off) I/O support = 1 (32-bit) unmaskirq = 1 (on) using_dma = 1 (on) keepsettings = 0 (off) nowerr = 0 (off) readonly = 0 (off) readahead = 8 (on) geometry = 665/16/63, sectors = 670320, start = 0
Model=Conner Peripherals 340MB - CP30344, FwRev=6FT1.67, SerialNo=BQB2B7G Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=665/16/63, TrkSize=40887, SectSize=649, ECCbytes=4 BuffType=3(DualPortCache), BuffSize=64kB, MaxMultSect=64, MultSect=off DblWordIO=no, OldPIO=1, DMA=yes, OldDMA=1 CurCHS=665/16/63, CurSects=980418570, LBA=no DMA modes: *mword0
Hope this helps.
Kurt
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |