lkml.org 
[lkml]   [2001]   [Feb]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectMucho timeouts on USB
    Hi,

    Just got a D-Link USB radio (R100) and I'm seeing lots of timeouts with
    it. I've seen this through the last few 2.4.1+ and -ac+ kernels.

    Current config:

    Dual P3-500 w/ 512mb of RAM
    Tyan Tiger 133 mobo with VIA chipset, onboard USB
    Kernel 2.4.1-ac9 compiled with egcs-1.1.2

    The only thing funky is that three devices are sharing an interrupt:

    CPU0 CPU1
    0: 216690 219652 IO-APIC-edge timer
    1: 3564 3816 IO-APIC-edge keyboard
    2: 0 0 XT-PIC cascade
    3: 7 20 IO-APIC-edge serial
    5: 1017 1135 IO-APIC-level EMU10K1
    8: 0 1 IO-APIC-edge rtc
    11: 22978 22756 IO-APIC-level aic7xxx, eth0, usb-uhci
    12: 64220 63272 IO-APIC-edge PS/2 Mouse
    14: 12132 12810 IO-APIC-edge ide0
    15: 3 10 IO-APIC-edge ide1
    NMI: 436327 436327
    LOC: 436151 436128
    ERR: 0

    The ethernet card is a 3Com 3c905, the SCSI card is Adaptec 7892B (19160
    card). No problems with either as far as I can tell, but one of these
    modules may not be playing nice with interrupt sharing.

    The messages:

    usb.c: registered new driver usbdevfs
    usb.c: registered new driver hub
    usb-uhci.c: $Revision: 1.251 $ time 17:33:47 Feb 9 2001
    usb-uhci.c: High bandwidth mode enabled
    usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11
    usb-uhci.c: Detected 2 ports
    usb.c: new USB bus registered, assigned bus number 1
    usb_control/bulk_msg: timeout
    usb.c: USB device not accepting new address=2 (error=-110)
    usb.c: USB device 3 (vend/prod 0x4b4/0x1002) is not claimed by any
    active driver.
    usb_control/bulk_msg: timeout
    usb.c: error getting string descriptor 0 (error=-110)
    usb_control/bulk_msg: timeout
    usb.c: error getting string descriptor 0 (error=-110)
    usb_control/bulk_msg: timeout
    usb.c: error getting string descriptor 0 (error=-110)
    usb_control/bulk_msg: timeout
    usb.c: error getting string descriptor 0 (error=-110)
    usb_control/bulk_msg: timeout
    usb_control/bulk_msg: timeout
    usb_control/bulk_msg: timeout
    usb_control/bulk_msg: timeout
    usb_control/bulk_msg: timeout
    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:13    [W:5.241 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site