[lkml]   [2001]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: Reiserfs, 3 Raid1 arrays, 2.4.1 machine locks up
Colonel wrote:

> In clouddancer.list.kernel.owner, you wrote:
> >
> >I'm not subscribed to the kernel mailing list, so please cc any replies
> >to me.
> >
> >I'm building a firewall on a P133 with 48 MB of memory using RH 7.0,
> >latest updates, etc. and kernel 2.4.1.
> >I've built a customized install of RH (~200MB) which I untar onto the
> >system after building my raid arrays, etc. via a Rescue CD which I
> >created using Timo's Rescue CD project. The booting kernel is
> >2.4.1-ac10, no networking, raid compiled in but raid1 as a module
> Hmm, raid as a module was always a Bad Idea(tm) in the 2.2 "alpha"
> raid (which was misnamed and is 2.4 raid). I suggest you change that
> and update, as I had no problems with 2.4.2-pre2/3, nor have any been
> posted to the raid list.

I just tried with 2.4.1-ac14, raid and raid1 compiled in and it did the
same thing. I'm going to try to compile reiserfs in (if I have enough room
to still fit the kernel on the floppy with it's initial ramdisk, etc.) and
see what that does.

James A. Pattie

Linux -- SysAdmin / Programmer
PC & Web Xperience, Inc.

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to
More majordomo info at
Please read the FAQ at

 \ /
  Last update: 2005-03-22 13:17    [W:0.126 / U:3.976 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site