lkml.org 
[lkml]   [2001]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
Subject2 SCSI controllers causing boot problems...

I know I've seen this in the past, but the answer slips my mind and I
can't find anything in the archives.

I've just set up a box w/ an aic7xxx card. The boot drive hangs off
that card. During installation, the boot drive is sda. Lilo contains
"root=/dev/sda8".

I compiled a new kernel with the 3ware raid driver. When I rebooted,
the 3ware card driver must have been loaded first; /dev/sda8 was no
longer the root device.

How do I control the device designations during boot?

--
Drew Bertola | Send a text message to my pager or cell ...
| http://jpager.com/Drew

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:28    [W:0.095 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site