lkml.org 
[lkml]   [2001]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: VT82C686A corruption with 2.4.x
On Wed, Jan 31, 2001 at 05:57:45PM -0500, safemode wrote:
> Alan Cox wrote:
>
> > > better than i ever got with 2.4 even when only one drive was on a channel.
> > > Right now my k7-2 750 is at 849mhz with a FSB of 114Mhz and PCI at 34Mhz.
> >
> > Hint: people who overclock machines get suprising odd results and bad stuff
> > happens. Please dont waste developers time unless you can reproduce it at
> > the intended speed for the components
>
> Like i said .. i just did that within the last 5 min it has nothing to do
> with any problems i've been talking about

Btw, if you run your FSB at 114 MHz, you need to pass 'idebus=38' to the
IDE driver so that it knows your PCI bus runs at 38 MHz (3x38 = 114).

Otherwise you'll get incorrect timing etc.

--
Vojtech Pavlik
SuSE Labs
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:26    [W:0.076 / U:22.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site