[lkml]   [2001]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: i810 audio patch

    > Well, your second version of the file had the merge done right (my code
    > didn't include S/PDIF support or PM support, so those parts were
    > different, but the parts that were the same as my code were done
    > correctly). I'm attaching a patch that bumps the code from your 0.05b
    > to a unified 0.06 and I'm also placing the 0.06 i810_audio.c.gz file on
    > my web site in the same place that I put the 0.05 version. If people
    > could please test this and report problems back, I would like to get
    > this one off my plate (aka, I don't want to hear any more about artsd
    > not working ever again so I want testers to tell me that it's fixed ;-)

    Umh, problems ->

    modprobe produced an oops (17-pre2), module is left in init state :

    # lsmod
    Module Size Used by
    i810_audio 19472 1 (initializing)
    ac97_codec 9632 0 [i810_audio]

    Intel 810 + AC97 Audio, version 0.06, 15:21:16 Dec 4 2001
    PCI: Found IRQ 9 for device 00:1f.5
    PCI: Sharing IRQ 9 with 00:1f.3
    PCI: Setting latency timer of device 00:1f.5 to 64
    i810: Intel ICH2 found at IO 0xef00 and 0xe800, IRQ 9
    i810_audio: Audio Controller supports 6 channels.
    ac97_codec: AC97 Audio codec, id: 0x4144:0x5360 (Analog Devices AD1885)
    i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2

    # ksymoops < oops0
    ksymoops 2.4.1 on i686 2.4.17-pre2-mzg2. Options used
    -V (default)
    -k /proc/ksyms (default)
    -l /proc/modules (default)
    -o /lib/modules/2.4.17-pre2-mzg2/ (default)
    -m /boot/ (default)

    Warning: You did not tell me where to find symbol information. I will
    assume that the log matches the kernel and modules that are running
    right now and I'll use the default options above for symbol resolution.
    If the current kernel and/or modules do not match the log, you can get
    more accurate output by telling me the kernel version and where to find
    map, modules, ksyms etc. ksymoops -h explains the options.

    cpu: 0, clocks: 1329057, slice: 664528
    ac97_codec: AC97 Audio codec, id: 0x4144:0x5360 (Analog Devices AD1885)
    CPU: 0
    EIP: 0010:[<d08f944e>] Not tainted
    Using defaults from ksymoops -t elf32-i386 -a i386
    EFLAGS: 00010246
    eax: 14244000 ebx: 00000000 ecx: 18000004 edx: 00000000
    esi: cfe07880 edi: cfe077b0 ebp: 00000000 esp: ce817e90
    ds: 0018 es: 0018 ss: 0018
    Process modprobe (pid: 727, stackpage=ce817000)
    Stack: 00000000 cfe07780 0000009c cfe0781c cfea2400 d08fc761 cfe07780 0000bb80
    00000180 d08fc60f d08fda60 cfe077b0 cfe07780 cfd96800 d08fd930 cfd96800
    d08fd0c7 cfea2400 d08fcc17 d08fd998 d08fdac0 cfea2400 00000000 c01aa55c
    Call Trace: [<d08fc761>] [<d08fc60f>] [<d08fda60>] [<d08fd930>] [<d08fd0c7>]
    [<d08fcc17>] [<d08fd998>] [<d08fdac0>] [<c01aa55c>] [<d08fd998>] [<d08fdac0>]
    [<c01aa5c2>] [<d08fdac0>] [<d08fcd94>] [<d08fdac0>] [<d08fd740>] [<c0117f25>]
    [<d08fdbd8>] [<d08f9060>] [<c0106f1b>]
    Code: f7 35 28 d9 8f d0 89 07 8b 07 59 5b 5e 5f 5d c3 89 f6 55 57

    >>EIP; d08f944e <[i810_audio]i810_set_dac_rate+9e/b0> <=====
    Trace; d08fc761 <[i810_audio]i810_configure_clocking+c1/2c0>
    Trace; d08fc60f <[i810_audio]i810_ac97_init+2bf/350>
    Trace; d08fda60 <[i810_audio]i810_mixer_fops+0/60>
    Trace; d08fd930 <[i810_audio]card_names+0/14>
    Trace; d08fd0c7 <[i810_audio].rodata.end+c/11>
    Trace; d08fcc17 <[i810_audio]i810_probe+2b7/360>
    Trace; d08fd998 <[i810_audio]i810_pci_tbl+54/a8>
    Trace; d08fdac0 <[i810_audio]i810_pci_driver+0/3f>
    Trace; c01aa55c <pci_announce_device+3c/60>
    Trace; d08fd998 <[i810_audio]i810_pci_tbl+54/a8>
    Trace; d08fdac0 <[i810_audio]i810_pci_driver+0/3f>
    Trace; c01aa5c2 <pci_register_driver+42/60>
    Trace; d08fdac0 <[i810_audio]i810_pci_driver+0/3f>
    Trace; d08fcd94 <[i810_audio]i810_init_module+24/a0>
    Trace; d08fdac0 <[i810_audio]i810_pci_driver+0/3f>
    Trace; d08fd740 <[i810_audio].LC31+28/40>
    Trace; c0117f25 <sys_init_module+555/630>
    Trace; d08fdbd8 <.data.end+d9/????>
    Trace; d08f9060 <[i810_audio]i810_alloc_pcm_channel+0/4>
    Trace; c0106f1b <system_call+33/38>
    Code; d08f944e <[i810_audio]i810_set_dac_rate+9e/b0>
    00000000 <_EIP>:
    Code; d08f944e <[i810_audio]i810_set_dac_rate+9e/b0> <=====
    0: f7 35 28 d9 8f d0 div 0xd08fd928,%eax <=====
    Code; d08f9454 <[i810_audio]i810_set_dac_rate+a4/b0>
    6: 89 07 mov %eax,(%edi)
    Code; d08f9456 <[i810_audio]i810_set_dac_rate+a6/b0>
    8: 8b 07 mov (%edi),%eax
    Code; d08f9458 <[i810_audio]i810_set_dac_rate+a8/b0>
    a: 59 pop %ecx
    Code; d08f9459 <[i810_audio]i810_set_dac_rate+a9/b0>
    b: 5b pop %ebx
    Code; d08f945a <[i810_audio]i810_set_dac_rate+aa/b0>
    c: 5e pop %esi
    Code; d08f945b <[i810_audio]i810_set_dac_rate+ab/b0>
    d: 5f pop %edi
    Code; d08f945c <[i810_audio]i810_set_dac_rate+ac/b0>
    e: 5d pop %ebp
    Code; d08f945d <[i810_audio]i810_set_dac_rate+ad/b0>
    f: c3 ret
    Code; d08f945e <[i810_audio]i810_set_dac_rate+ae/b0>
    10: 89 f6 mov %esi,%esi
    Code; d08f9460 <[i810_audio]i810_set_adc_rate+0/b0>
    12: 55 push %ebp
    Code; d08f9461 <[i810_audio]i810_set_adc_rate+1/b0>
    13: 57 push %edi

    1 warning issued. Results may not be reliable.

    Mario Mikočević (Mozgy)
    mozgy at hinet dot hr
    My favourite FUBAR ...
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:13    [W:0.044 / U:22.212 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site