lkml.org 
[lkml]   [2001]   [Dec]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Deadlock: Linux-2.2.18, sym53c8xx, Compaq ProLiant, HP Ultrium
Hi Gérard,

thanks for your reply!

Gérard Roudier wrote:
>
> On Wed, 19 Dec 2001, Andreas Haumer wrote:
>
[...]
>
> > Dec 10 15:00:01 server kernel: st0: Error with sense data: Info
> > fld=0x8000, Current st09:00: sense key Hardware Error
> > Dec 10 15:00:01 server kernel: Additional sense indicates Internal
> > target failure
>
> This one is the result of a REQUEST SENSE performed due probably to a
> CHECK condition SCSI status reported by the device. It is not a SCSI
> transport problem. The device just reports an error to the application
> client. This is not a normal situation but happens very often.
>
Ok.

> > [...]
> >
> > After that, the amanda process hangs in state "D" and
> > cannot be killed anymore. The machine itself is still
> > working.
> > This _seems_ to be the indication of an error of the
> > HP Ultrium itself, though the drive works quite fine
> > otherwise...
>
> The 'D' states indicates that the process is waiting for something without
> being interruptible. This may be due to it not having been waken up on the

I knew that...

> IO error. The sym53c8xx driver did its work by performing the REQUEST
> SENSE, but something in upper layer seem not to complete the IO.
>
That's what I wasn't sure about...

[...]
>
> > b) Does the st0 error message indicate it should be replaced?
>
> Probably not. But it is very poor an information about the real issue.
>
I know, but I have the problem to decide how to proceed in this
situation...

> > c) Is there a bug in the sym53c8xx driver which makes the
> > amanda process hang uninterruptable when this error occurs?
>
> Not known. But possible, even if in my opinion, the driver is not at
> fault.
>
Ok.

[...]
>
> There are probably still bugs in the driver, but none are intentionnal,
> beleive me.
>
I honestly do believe you! :-)

> > The Ultrium hardware error is not reproducable at will. It
> > just happens every now and then.
> > Next thing I will try is to use a different SCSI controller
> > (Adaptec 29160 or the like) to see if the hanging process
> > occurs with a different SCSI driver, too.
>
> This is indeed something to try.
> I am very interested in the result.
>
The controller change is scheduled on December 28th.
We'll then see how it works in the next weeks/months.
I'll keep you (and LKML) informend...

Thank you.

- andreas

--
Andreas Haumer | mailto:andreas@xss.co.at
*x Software + Systeme | http://www.xss.co.at/
Karmarschgasse 51/2/20 | Tel: +43-1-6060114-0
A-1100 Vienna, Austria | Fax: +43-1-6060114-71
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:14    [W:0.069 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site