Messages in this thread | | | From | Marko van Dooren <> | Subject | philips CDD 3610 cd-writer freezes system with any 2.4 kernel | Date | Sun, 25 Nov 2001 22:06:42 +0100 |
| |
[1.] philips CDD 3610 cd-writer freezes system with any 2.4 kernel [.2] with any 2.4 kernel, writing a cd results in a system freeze. fast blanking works, but writing locks up everything. With 2.2.x kernels, everything works fine. I have a dual celeron system (the *ss-sucking Abit BP6 mainboard :( )
Both the harddisk (maxtor) and the cdwriter are attached to the DMA33 controller because the HPT controller on the mainboard is crap.
Following error messages were in /var/log/messages:
Nov 25 21:35:45 progeny kernel: hda: timeout waiting for DMA Nov 25 21:35:45 progeny kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14 Nov 25 21:35:45 progeny kernel: hda: status error: status=0x58 { DriveReady SeekComplete DataRequest } Nov 25 21:35:45 progeny kernel: hda: drive not ready for command Nov 25 21:36:05 progeny kernel: scsi : aborting command due to timeout : pid 246, scsi0, channel 0, id 1, lun 0 Write (10) 00 00 00 00 ba 00 00 1f 00 Nov 25 21:36:05 progeny kernel: hdd: timeout waiting for DMA Nov 25 21:36:05 progeny kernel: ide_dmaproc: chipset supported ide_dma_timeout func only: 14
[3.] scsi emulation , sg ? [4.] 2.4.16-pre1 (and any other 2.4 kernel I've tried)
[7.] debian/unstable [7.1]
Gnu C 2.95.4 Gnu make 3.79.1 util-linux 2.11m mount 2.11m modutils 2.4.11 e2fsprogs 1.25 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.60 Console-tools 0.2.3 Sh-utils 2.0.11 Modules Loaded agpgart NVdriver sg ide-scsi scsi_mod snd-pcm-oss snd-pcm-plugin snd-mixer-oss snd-card-sbawe isapnp snd-sb16-csp snd-sb16-dsp snd-pcm snd-mixer snd-opl3 snd-hwdep snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device snd soundcore parport_pc lp parport ne2k-pci 8390
[7.2]
processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 6 model name : Celeron (Mendocino) stepping : 5 cpu MHz : 367.506 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 732.36
processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 6 model name : Celeron (Mendocino) stepping : 5 cpu MHz : 367.506 cache size : 128 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 mmx fxsr bogomips : 734.00
[7.3]
soundcore 3396 0 (autoclean) NVdriver 713536 17 (autoclean) sg 23364 0 (unused) ide-scsi 7488 0 scsi_mod 80184 2 [sg ide-scsi] parport_pc 15656 1 (autoclean) lp 5664 0 (autoclean) parport 24768 1 (autoclean) [parport_pc lp] ne2k-pci 4768 2 (autoclean) 8390 6208 0 (autoclean) [ne2k-pci]
[7.4]
0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0213-0213 : isapnp read 02f8-02ff : serial(auto) 0376-0376 : ide1 0378-037a : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0a79-0a79 : isapnp write 0cf8-0cff : PCI conf1 4000-403f : Intel Corp. 82371AB PIIX4 ACPI 5000-501f : Intel Corp. 82371AB PIIX4 ACPI c000-c01f : Intel Corp. 82371AB PIIX4 USB c400-c41f : Realtek Semiconductor Co., Ltd. RTL-8029(AS) c400-c41f : ne2k-pci c800-c81f : Realtek Semiconductor Co., Ltd. RTL-8029(AS) (#2) c800-c81f : ne2k-pci cc00-cc07 : Triones Technologies, Inc. HPT366 / HPT370 d000-d003 : Triones Technologies, Inc. HPT366 / HPT370 d400-d4ff : Triones Technologies, Inc. HPT366 / HPT370 d400-d407 : ide2 d410-d4ff : HPT366 d800-d807 : Triones Technologies, Inc. HPT366 / HPT370 (#2) dc00-dc03 : Triones Technologies, Inc. HPT366 / HPT370 (#2) e000-e0ff : Triones Technologies, Inc. HPT366 / HPT370 (#2) e000-e007 : ide3 e010-e0ff : HPT366 f000-f00f : Intel Corp. 82371AB PIIX4 IDE f000-f007 : ide0 f008-f00f : ide1
00000000-0009efff : System RAM 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-0bffffff : System RAM 00100000-001dddc1 : Kernel code 001dddc2-0021831f : Kernel data d0000000-d3ffffff : Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge d4000000-d5ffffff : PCI Bus #01 d4000000-d4ffffff : nVidia Corporation Riva TnT2 [NV5] d6000000-d7ffffff : PCI Bus #01 d6000000-d7ffffff : nVidia Corporation Riva TnT2 [NV5]
[7.5]
00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (rev 03) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=0 SBA- AGP+ 64bit- FW- Rate=x2
00:01.0 PCI bridge: Intel Corp. 440BX/ZX - 82443BX/ZX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000f000-00000fff Memory behind bridge: d4000000-d5ffffff Prefetchable memory behind bridge: d6000000-d7ffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02) Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Interrupt: pin D routed to IRQ 19 Region 4: I/O ports at c000 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin ? routed to IRQ 9
00:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Subsystem: D-Link System Inc DE-528 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at c400 [size=32]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS) Subsystem: D-Link System Inc DE-528 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at c800 [size=32]
00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366 / HPT370 (rev 01) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 120 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin A routed to IRQ 18 Region 0: I/O ports at cc00 [size=8] Region 1: I/O ports at d000 [size=4] Region 4: I/O ports at d400 [size=256] Expansion ROM at <unassigned> [disabled] [size=128K]
00:13.1 Unknown mass storage controller: Triones Technologies, Inc. HPT366 / HPT370 (rev 01) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 120 (2000ns min, 2000ns max), cache line size 08 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at d800 [size=8] Region 1: I/O ports at dc00 [size=4] Region 4: I/O ports at e000 [size=256]
01:00.0 VGA compatible controller: nVidia Corporation Riva TnT2 [NV5] (rev 11) (prog-if 00 [VGA]) Subsystem: Asustek Computer, Inc. AGP-V3800 SGRAM Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d6000000 (32-bit, prefetchable) [size=32M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 1 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=31 SBA- AGP+ 64bit- FW- Rate=x2
[7.6]
Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: E-IDE Model: CD-ROM 48X/AKU Rev: U22 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: PHILIPS Model: CDD3610 CD-R/RW Rev: 3.01 Type: CD-ROM - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |