lkml.org 
[lkml]   [2001]   [Nov]   [16]   [last100]   RSS Feed
Views: [more markup]  [less markup]  [headers]  [forward] 
 
Messages in this thread
/
DateFri, 16 Nov 2001 08:08:09 +0100
From"Ph. Marek" <>
SubjectRe: Lockup in IDE code
I've had the same problem.

Lockups with 2.4.14pre1 + ext3-patch, sysrq not possible, HD led is on.

This is a 7IXE4 (AMD756), Duron 650, 384MB. 2 HD's, 1 CDROM.


I've noted that on startup I got "spurious 8259A interrupt: IRQ7", and the
machine locked hard on IDE activity (sometimes).
after observing the above message and others like 
	hda: timeout waiting for DMA
	ide_dmaproc: chipset supported ide_dma timeoutfunc only: 14
	hda: read_intr: status=0x51
	hda: read_intr: status=0x04
	hda: read_intr: status=0x51
	hda: read_intr: status=0x04
	hda: read_intr: status=0x51
	hda: read_intr: status=0x04
	ide0: reset: success

The I've tested disabling some options.
So far my best result was disabling APIC on UP (both - IOAPIC and APIC) -
so far I've had no more lockups.

Will test further, but this seemed to be the problem for me.


Regards,

Phil


-
This message is RSA-encrypted: n=33389, e=257

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 12:13    [W:0.125 / U:0.060 seconds]
©2003-2008 Jasper Spaans