lkml.org 
[lkml]   [2001]   [Oct]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectLinux Test Project results on 2.4.10-ac7


Results from one test run:

10692 test cases PASS
12 test cases that FAIL in 2.4.10-ac4 now PASS (personality)
24 test cases FAIL


This VFS message displayed on the console about 1 minute into the test:

2 0 2 0 476912 3744 15368 0 0 102 57 121 627 1 47 52
0 0 0 0 474128 5304 16364 0 0 197 337 146 252 1 9 90
VFS: brelse: Trying to free free buffer
VFS: brelse: Trying to free free buffer
0 0 0 0 462392 13304 19788 0 0 428 1030 178 192 2 3 95
1 0 0 0 462000 13304 20160 0 0 47 36 110 90 0 0 100

I/O
---
These tests, as usual, cause the most noticeable delays in keyboard response. Keystrokes
are not lost, but I can type several things in vim and it takes a few seconds for them
to eventually blast on the display. At one point I looked at "top" during one of these
pauses and saw kupdated and vim with D STAT.

growfiles -b -e 1 -i 0 -L 120 -u -g 4090 -T 100 -t 408990 -l -C 10 -c 1000 -S 10 -f Lgf02_
growfiles -b -e 1 -i 0 -L 120 -u -g 5000 -T 100 -t 499990 -l -C 10 -c 1000 -S 10 -f Lgf03_
growfiles -b -e 1 -i 0 -L 120 -w -u -r 10-5000 -I r -T 10 -l -S 2 -f Lgf04_

This shows that all of the growfiles tests succeeded:

Linux rushmore 2.4.10-ac7 948921 iterations on 41 files in 760 seconds

Memory
------
Near the end of ltp, this test runs twice:
Filling up 80% of ram which is 1177360793d bytes
PASS ... 1177550848 bytes allocated.
cmdline="mtest01 -p80"

Both tests succeed at memory allocation. Interestingly, the swpd vmstat column
stays large after the tests completes:

procs memory swap io system cpu
r b w swpd free buff cache si so bi bo in cs us sy id
0 2 0 120 455316 17852 9132 0 0 0 2847 642 714 0 5 95
2 0 0 120 344976 61852 10268 0 0 148 6260 335 307 18 21 61
0 1 1 415424 1740 53168 2336 8 20256 10 20277 208 5032 54 26 20
1 0 0 118984 327592 53496 5548 506 77067 1076 77076 1314 16533 19 16 65
1 0 0 118984 322068 53796 11268 16 0 746 51 167 836 5 5 90
0 0 0 118984 321508 53796 11724 0 0 52 9 109 1460 0 72 27
0 0 0 118984 321480 53796 11752 0 0 4 17 103 77 0 1 99
0 0 0 118984 321480 53796 11752 0 0 0 12 103 69 0 0 100
0 0 0 118984 320596 53796 12420 23 0 107 5 118 86 0 0 100


Log notes
---------
/var/log/messages file shows:
Oct 5 23:16:29 rushmore modprobe: modprobe: Can't locate module personality-1

Repeats 12 times for personalities 1-11 and 221
Note: 12 of 13 personality tests now PASS

Oct 5 23:16:48 rushmore modprobe: modprobe: Can't locate module net-pf-0

I thought the net-pf-0 module might be enabled by CONFIG_RTNETLINK, but
perhaps it is something else:

root@rushmore:/usr/src/linux# grep NETLINK .config
CONFIG_NETLINK=y
CONFIG_RTNETLINK=y
CONFIG_NETLINK_DEV=y
root@rushmore:/usr/src/linux# ls -l /dev/tap0
crw-r--r-- 1 root root 36, 16 Jul 23 03:28 /dev/tap0


Hardware:
AMD Athlon 1333
512 Mb RAM
IWill KK266 motherboard (via chipset)
1024 Mb swap

Linux rushmore 2.4.10-ac7 #1 Fri Oct 5 22:56:36 EDT 2001 i686 unknown

Gnu C 2.95.3
Gnu make 3.79.1
binutils 2.11
util-linux 2.11k
mount 2.11k
modutils 2.4.8
e2fsprogs 1.24a
reiserfsprogs 3.x.0j
PPP 2.4.1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Kbd 1.06
Sh-utils 2.0
Modules Loaded ppp_deflate bsd_comp ppp_async ipt_state ipt_limit ipt_MASQUERADE iptable_nat ip_conntrack iptable_filter ip_tables

All reiserfs filesystems


Summary of FAIL tests

execve06 1 FAIL : Execve fail, execve06, errno = 2
execve06 1 FAIL : Execve fail, execve06, errno = 2
execve06 1 FAIL : Execve fail, execve06, errno = 2
execve06 1 FAIL : Execve fail, execve06, errno = 2
execve06 1 FAIL : Execve fail, execve06, errno = 2
execve06 1 FAIL : Execve fail, execve06, errno = 2
execve06 1 FAIL : Execve fail, execve06, errno = 2
execve06 1 FAIL : Execve fail, execve06, errno = 2
fcntl07 3 FAIL : setreuid to user nobody failed, errno: 1
fcntl07 3 FAIL : child returned bad exit status
personality02 1 FAIL : call failed - errno = 0 - Success
pread02 2 FAIL : pread() returned 0, expected -1, errno:22
recv01 3 FAIL : invalid recv buffer ; returned 0 (expected -1), errno 88 (expected 14)
setpgid03 2 FAIL : setpgid FAILED, expect EACCES got 1
shmdt02 1 FAIL : call succeeded unexpectedly
vhangup01 1 FAIL : setreuid failed
vhangup02 1 FAIL : vhangup() failed, errno:1
waitpid05 6 FAIL : signal error: core dump bit not set for exception number 3
waitpid05 9 FAIL : signal error: core dump bit not set for exception number 4
waitpid05 12 FAIL : signal error: core dump bit not set for exception number 5
waitpid05 15 FAIL : signal error: core dump bit not set for exception number 6
waitpid05 18 FAIL : signal error: core dump bit not set for exception number 8
waitpid05 23 FAIL : signal error: core dump bit not set for exception number 11

Thanks to the folks at the Linux Test Project: http://ltp.sf.net/
Thanks to all the kernel hackers.

--
Randy Hron
Linux News at http://lwn.net/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:04    [W:0.322 / U:0.048 seconds]
©2003-2014 Jasper Spaans. Advertise on this site