[lkml]   [2001]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
    SubjectRe: 3c59x:command 0x3002 did not complete! Status=0xffff
    Harald Dunkel wrote:
    > Hi folks,
    > Does anybody know what this message in kern.log means?
    > eth0: command 0x3002 did not complete! Status=0xffff

    There's a function in the driver which issues reset commands to the
    hardware and then spins, waiting for completion. Usually it takes
    a single PCI cycle. In your case it timed out.

    It look to me like the NIC is powered down. Could you please
    send me a bunch of info:

    - Does the interface actually work after this message, or is
    it dead?

    - If the latter, did you warmboot from another OS?

    - Does it help if you add the line

    options 3c59x enable_wol=1

    to /etc/modules.conf? (This is a misnomer - enable_wol
    enables the driver's power management functions).

    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to
    More majordomo info at
    Please read the FAQ at

     \ /
      Last update: 2005-03-22 13:11    [W:0.021 / U:18.820 seconds]
    ©2003-2016 Jasper Spaans. hosted at Digital OceanAdvertise on this site