Messages in this thread | | | Date | Tue, 23 Oct 2001 13:35:34 -0700 | From | Ben Greear <> | Subject | Small bug with ZYNX 4-Port NIC (Tulip driver) |
| |
Regarding the tulip driver that comes default with 2.4.13-pre5:
There seems to be a problem with the ZYNX 4-port NIC. It auto-negotiates and brings it's link up, but it's advertise bits are set to (only) 10bt-FD. If I force the bits to 10/100 FD/HD (all 4 set, in other words), then the NIC briefly reports this setting (while LINK is DOWN), but as soon as it completes it's autonegotiation, the advert bits are once again set to 10bt-FD.
I do NOT see this problem on the D-LINK 4-port NIC or the EEPRO NICs I've been testing with....
Thanks, Ben
-- Ben Greear <greearb@candelatech.com> <Ben_Greear AT excite.com> President of Candela Technologies Inc http://www.candelatech.com ScryMUD: http://scry.wanfear.com http://scry.wanfear.com/~greear - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |