lkml.org 
[lkml]   [2001]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: Linux 2.4.10-ac10
On 9 Oct 2001, Thomas Hood wrote:

> > Two things that might perhaps have influence:
> > 2.4.10-ac9
> > ...
> > o Clean up ad1816 resource handling (Arnaldo Carvalho de Melo)
> > ...
>
> I think you've got it.
>...

Yes, that was it. Sound works again for me after I've reversed the
attached patch to drivers/sound/ad1816.c.

cu
Adrian

--

Get my GPG key: finger bunk@debian.org | gpg --import

Fingerprint: B29C E71E FE19 6755 5C8A 84D4 99FC EA98 4F12 B400
--- linux.ac/drivers/sound/ad1816.c
+++ linux.ac/drivers/sound/ad1816.c
@@ -28,6 +28,8 @@
* Christoph Hellwig: Adapted to module_init/module_exit. 2000/03/03
*
* Christoph Hellwig: Added isapnp support 2000/03/15
+ *
+ * Arnaldo Carvalho de Melo: get rid of check_region 2001/10/07
*/

#include <linux/config.h>
@@ -48,7 +50,7 @@
timeout--; \
} \
if (timeout==0) {\
- printk("ad1816: Check for power failed in %s line: %d\n",__FILE__,__LINE__); \
+ printk(KERN_WARNING "ad1816: Check for power failed in %s line: %d\n",__FILE__,__LINE__); \
} \
}

@@ -78,9 +80,9 @@

} ad1816_info;

-static int nr_ad1816_devs = 0;
-static int ad1816_clockfreq=33000;
-static int options=0;
+static int nr_ad1816_devs;
+static int ad1816_clockfreq = 33000;
+static int options;

/* for backward mapping of irq to sound device */

@@ -558,14 +560,15 @@


if (irq < 0 || irq > 15) {
- printk ("ad1816: Got bogus interrupt %d\n", irq);
+ printk(KERN_WARNING "ad1816: Got bogus interrupt %d\n", irq);
return;
}

dev = irq2dev[irq];

if (dev < 0 || dev >= num_audiodevs) {
- printk ("ad1816: IRQ2AD1816-mapping failed for irq %d device %d\n", irq,dev);
+ printk(KERN_WARNING "ad1816: IRQ2AD1816-mapping failed for "
+ "irq %d device %d\n", irq,dev);
return;
}

@@ -1000,8 +1003,10 @@
int *osp=hw_config->osp;
int tmp;

- printk("ad1816: AD1816 sounddriver Copyright (C) 1998 by Thorsten Knabe\n");
- printk("ad1816: io=0x%x, irq=%d, dma=%d, dma2=%d, clockfreq=%d, options=%d isadmabug=%d\n",
+ printk(KERN_INFO "ad1816: AD1816 sounddriver "
+ "Copyright (C) 1998 by Thorsten Knabe\n");
+ printk(KERN_INFO "ad1816: io=0x%x, irq=%d, dma=%d, dma2=%d, "
+ "clockfreq=%d, options=%d isadmabug=%d\n",
hw_config->io_base,
hw_config->irq,
hw_config->dma,
@@ -1010,16 +1015,17 @@
options,
isa_dma_bridge_buggy);

- if (check_region (io_base, 16)) {
- printk ("ad1816: I/O port 0x%03x not free\n", io_base);
- return 0;
+ if (request_region(io_base, 16, "AD1816 Sound")) {
+ printk(KERN_WARNING "ad1816: I/O port 0x%03x not free\n",
+ io_base);
+ goto err;
}

DEBUGLOG(printk ("ad1816: detect(%x)\n", io_base));

if (nr_ad1816_devs >= MAX_AUDIO_DEV) {
- printk ("ad1816: detect error - step 0\n");
- return 0;
+ printk(KERN_WARNING "ad1816: detect error - step 0\n");
+ goto out_release_region;
}

devc->base = io_base;
@@ -1032,7 +1038,7 @@
tmp=inb(devc->base);
if ( (tmp&0x80)==0 || tmp==255 ) {
DEBUGLOG (printk ("ad1816: Chip is not an AD1816 or chip is not active (Test 0)\n"));
- return(0);
+ goto out_release_region;
}


@@ -1040,14 +1046,14 @@
ad_write(devc,8,12345);
if (ad_read(devc,9)!=12345) {
DEBUGLOG (printk ("ad1816: Chip is not an AD1816 (Test 1)\n"));
- return(0);
+ goto out_release_region;
}

/* writes to ireg 8 are copied to ireg 9 */
ad_write(devc,8,54321);
if (ad_read(devc,9)!=54321) {
DEBUGLOG (printk ("ad1816: Chip is not an AD1816 (Test 2)\n"));
- return(0);
+ goto out_release_region;
}


@@ -1055,14 +1061,14 @@
ad_write(devc,10,54321);
if (ad_read(devc,11)!=54321) {
DEBUGLOG (printk ("ad1816: Chip is not an AD1816 (Test 3)\n"));
- return(0);
+ goto out_release_region;
}

/* writes to ireg 10 are copied to ireg 11 */
ad_write(devc,10,12345);
if (ad_read(devc,11)!=12345) {
DEBUGLOG (printk ("ad1816: Chip is not an AD1816 (Test 4)\n"));
- return(0);
+ goto out_release_region;
}

/* bit in base +1 cannot be set to 1 */
@@ -1070,15 +1076,19 @@
outb(0xff,devc->base+1);
if (inb(devc->base+1)!=tmp) {
DEBUGLOG (printk ("ad1816: Chip is not an AD1816 (Test 5)\n"));
- return(0);
+ goto out_release_region;
}


DEBUGLOG (printk ("ad1816: detect() - Detected OK\n"));
DEBUGLOG (printk ("ad1816: AD1816 Version: %d\n",ad_read(devc,45)));

- /* detection was successful */
+ /* detection was successful */
return 1;
+out_release_region:
+ release_region(io_base, 16);
+ /* detection was NOT successful */
+err: return 0;
}


@@ -1092,10 +1102,7 @@
int my_dev;
char dev_name[100];
ad1816_info *devc = &dev_info[nr_ad1816_devs];
-

- /* allocate i/o ports */
- request_region (hw_config->io_base, 16, "AD1816 Sound");
devc->base = hw_config->io_base;

/* disable all interrupts */
@@ -1105,35 +1112,29 @@
outb (0, devc->base+1);

/* allocate irq */
- if (hw_config->irq < 0 || hw_config->irq > 15) {
- release_region(hw_config->io_base, 16);
- return;
- }
+ if (hw_config->irq < 0 || hw_config->irq > 15)
+ goto out_release_region;
if (request_irq(hw_config->irq, ad1816_interrupt,0,
- "SoundPort",
- hw_config->osp) < 0) {
- printk ("ad1816: IRQ in use\n");
- release_region(hw_config->io_base, 16);
- return;
+ "SoundPort", hw_config->osp) < 0) {
+ printk(KERN_WARNING "ad1816: IRQ in use\n");
+ goto out_release_region;
}
devc->irq=hw_config->irq;

/* DMA stuff */
if (sound_alloc_dma (hw_config->dma, "Sound System")) {
- printk ("ad1816: Can't allocate DMA%d\n", hw_config->dma);
- free_irq(hw_config->irq,hw_config->osp);
- release_region(hw_config->io_base, 16);
- return;
+ printk(KERN_WARNING "ad1816: Can't allocate DMA%d\n",
+ hw_config->dma);
+ goto out_free_irq;
}
devc->dma_playback=hw_config->dma;

if ( hw_config->dma2 != -1 && hw_config->dma2 != hw_config->dma) {
- if (sound_alloc_dma (hw_config->dma2, "Sound System (capture)")) {
- printk ("ad1816: Can't allocate DMA%d\n", hw_config->dma2);
- sound_free_dma(hw_config->dma);
- free_irq(hw_config->irq,hw_config->osp);
- release_region(hw_config->io_base, 16);
- return;
+ if (sound_alloc_dma(hw_config->dma2,
+ "Sound System (capture)")) {
+ printk(KERN_WARNING "ad1816: Can't allocate DMA%d\n",
+ hw_config->dma2);
+ goto out_free_dma;
}
devc->dma_capture=hw_config->dma2;
devc->audio_mode=DMA_AUTOMODE|DMA_DUPLEX;
@@ -1157,15 +1158,8 @@
devc,
hw_config->dma,
hw_config->dma2)) < 0) {
- printk ("ad1816: Can't install sound driver\n");
- if (devc->dma_capture>=0) {
- sound_free_dma(hw_config->dma2);
- }
- sound_free_dma(hw_config->dma);
- free_irq(hw_config->irq,hw_config->osp);
- release_region(hw_config->io_base, 16);
- return;
-
+ printk(KERN_WARNING "ad1816: Can't install sound driver\n");
+ goto out_free_dma_2;
}

/* fill rest of structure with reasonable default values */
@@ -1211,6 +1205,17 @@
devc)) >= 0) {
audio_devs[my_dev]->min_fragment = 0;
}
+out: return;
+out_free_dma_2:
+ if (devc->dma_capture >= 0)
+ sound_free_dma(hw_config->dma2);
+out_free_dma:
+ sound_free_dma(hw_config->dma);
+out_free_irq:
+ free_irq(hw_config->irq,hw_config->osp);
+out_release_region:
+ release_region(hw_config->io_base, 16);
+ goto out;
}

static void __exit unload_card(ad1816_info *devc)
@@ -1242,9 +1247,8 @@

DEBUGLOG (printk("ad1816: Unloading card at base=%x was successful\n",devc->base));

- } else {
- printk ("ad1816: no device/card specified\n");
- }
+ } else
+ printk(KERN_WARNING "ad1816: no device/card specified\n");
}

static struct address_info cfg;
\
 
 \ /
  Last update: 2005-03-22 13:05    [W:0.065 / U:3.184 seconds]
©2003-2017 Jasper Spaans. hosted at Digital OceanAdvertise on this site